Tiffen 77mm Variable Neutral Density (ND) Filter
Available on backorder
- Provides 2 to 8 Stops of Light Control
- Rotating Ring to Choose Degree of ND
- Eliminates Buying Many ND Filters
- Use to Create Blurs/Special Effects
Tiffen 77mm Variable ND Filter
The 77mm Variable Neutral Density Filter from Tiffen offers a unique way of maintaining total control over your depth of field as well as presenting an efficient way to create some special effects. The filter is designed with a built-in rotating ring that controls neutral density ranging from 2 – 8 stops (0.6- 2.4). The heavier the density, the slower your shutter speed will be. This longer exposure allows the shutter to remain open long enough to record the same amount of light but will also create movement within the shot. Another major benefit of this filter is the elimination of having to buy and carry around individual neutral density filters. With this one filter, you can rotate to the degree of ND you want – a real time and money saver.
Simply mount the filter on your lens, set it to “Min” density then frame and focus. Care must be taken with focusing at heavier densities to make sure focus is accurate. However, if it isn’t, switch to manual focus and rotate to the desired degree of filtration.
For example, if your standard exposure without the filter is 1/500 @ f/8 and you then set the filter to “Min”, you change the shutter speed to 1/125 at the same aperture – thereby losing 2 stops of speed while gaining a hint of “blur” in the image. If that’s not enough filtration, continue rotating the filter until you reach the shutter speed you desire. Using the above example, you can even get down to 1/2 second @ f/8 (8 stops). It should be noted that the calibration marks on the filter ring are to be used only for reference and should not be regarded as accurate settings for specific densities.
A Neutral Density filter is used to create some unusual special effects such as capturing the “blur” of the rippling water of a waterfall or the swirling effect of city traffic. Since it allows the use of slower shutter speeds in bright light, it becomes possible to create these special effects that would normally not be possible to capture without the filter. And, since it can also help to control your depth of field, it permits you to shoot at wider apertures. Ultimately, its value is in helping to prevent bright, overly washed out images shot in bright light.
The ColorCore process allows Tiffen to control the color and density of their filters, and the characteristics of special effects filters with much greater accuracy than typical dyed-in-the-mass filters, which usually exhibit color and density variations. In this way, Tiffen can better control the various densities of their filters and thereby create more exact degrees of filtration.
Available on backorderReport Abuse
|Dimensions||15.4 × 14.2 × 3 cm|
Tiffen 77VND Specs
|Filter Type||Variable ND|
|Density||0.6 (2 Stops) to 2.4 (8 Stops)|
|Circular Size||77 mm|
|Front Accessory Thread / Bayonet||Unthreaded|
|Filter Thickness||0.35″ / 9 mm|
|Package Weight||0.35 lb|
|Box Dimensions (LxWxH)||6.05 x 5.6 x 1.15″|
Based on 0 reviews
- Store Name: PROFMEDIA
- Vendor: PROFMEDIA
317G EL-Haram Street
- No ratings found yet!
BNC to BNC Cables
LanParte HD-SDI BNC to BNC Cable (2m)
HD-SDI 3G-SDI CABLE (2m)
Pure coaxial transmission
Standard BNC connectors
LanParte HD-SDI BNC to BNC
The HD-SDI BNC to BNC Cable from Lanparte is a BNC male to BNC male coaxial transmission cable featuring a 0.8mm copper conductive core. The cable supports the transfer of both serial data and video signals, particularly HD-SDI quality video signals.SKU: SDI-200
SWIT S-2420C Bi-Color Edge Mounted Soft Panel LED light
- 75-Degree Beam Angle
- Color Control from 3200 – 5600K
- 10-100% Flicker-Free Dimming
- Accepts V-Mount or L-Series Batteries
SWIT S-2420C Bi-color LED Panel
The S-2420C Bi-Color Edge Mounted Soft Panel LED light from Swit is a sleek fixture with a thin 2″ metal design and a 75-degree beam angle. The S-2420C allows you to vary the color temperature from 3200 – 5600K or anywhere in between to match prevailing ambient color conditions or work creatively without resorting to filters. Flicker-free dimming from 10-100% brings another level of control. Settings and adjustments are displayed on the easy-to-read rear LCD screen. Both features maintain high color fidelity with a CRI of 96 and a TLCI rating of 98. Power requirements is yet another indication of the .versatility that’s key to the S-2420C’s design. The light will run on a V-Mount battery, dual Sony L-Series batteries, or on the included AC adapter, making it ready for worldwide use.SKU: S-2420C
On Camera Batteries
LanParte D-Tap to LP-E6 Dummy Battery
- D-Tap Connector
- LP-E6 Fixed Voltage Battery Pack
- For Select Canon Cameras
LanParte D-Tap to LP-E6 Dummy Battery
The D-Tap to LP-E6 Fixed Voltage Battery Pack from LanParte features a D-Tap connector on one side and a LP-E6 fixed voltage battery pack on the other. It is designed to be used with Canon EOS 5D Mark II/III/IV, 5DSR, 60D, 70D, 80D, 6D, 6D2, 7D, and 7D Mark II cameras. It is also compatible with the BMPCC 4K and 6K.SKU: E6P-D