Tiffen 77mm Circular Polarizing Filter
Available on backorder
- Makes a Blue Sky Bluer
- Enhances Clouds
- Eliminates Reflections
- High Quality ColorCore Glass
Tiffen 77mm Circular Polarizing Filter
Tiffen 77mm Circular Polarizer Filters – Light rays which are reflected become polarized. Polarizing filters are used to select which light rays enter your camera lens. They can remove unwanted reflections from non-metallic surfaces such as water or glass and also saturate colors providing better contrast. The effect can be seen through the viewfinder and changed by rotating the filter. The filter factor varies according to how the filter is rotated and its orientation to the sun.
If you’re out walking on a lovely day – in the mountains or at the beach – and you want to get a fabulous shot of a cloud-filled sky or make the water seem more saturated, then a polarizer is the way to go. This filter is the best way to make the clouds stand out, increase or decrease the saturation of the ocean or increase or decrease the reflection off the water. You can also use this filter when shooting into glass or windows since it will, again, either increase or decrease reflections.
If you’re shooting black and white and want to simulate a threatening storm, try throwing on a #25 Red filter. The vista will take on the appearance of an imminent, ominous storm.
Along with a UV or Skylight Filter, a polarizing filter should be a part of everyone’s gear bag. It can turn a run-of-the-mill image into a stunning, creative photo by increasing color saturation.
EGP1,004.57 EGP1,099.00
Available on backorder
Report Abuse| Weight | 0.1 kg |
|---|---|
| Dimensions | 11.2 × 9.2 × 1.4 cm |
Tiffen 77CP Specs
| Filter Type | Circular Polarizer |
| Filter Factor | 2.3 – 2.8 (1.2 – 1.5 Stop) |
| Shape | Circle |
| Circular Size | 77 mm |
| Rotating | Yes |
| Front Accessory Thread / Bayonet | 77 mm |
| Filter Thickness | 0.2″ / 5 mm |
| Filter Material | Glass |
| Coatings | None |
Packaging Info
| Package Weight | 0.175 lb |
| Box Dimensions (LxWxH) | 4.4 x 3.6 x 0.55″ |
Based on 0 reviews
Be the first to review “Tiffen 77mm Circular Polarizing Filter”
Vendor Information
- Vendor: Gleee
- Address:
- No ratings found yet!
-
Lens Filters, Photography
Tiffen 4 x 5.65″ Clear Uncoated Water White Glass Filter
- Clear Protection Filter
- Uncoated for Greater Durability
- Water White Glass Construction
- ColorCore Technology
Tiffen Water White Filter
The Tiffen 4 x 5.65″ Clear Uncoated Water White Glass Filter is a simple, clear filter designed for general protection for your lens. This optically clear filter does not affect the overall image quality while helping reduce dust, scratches, moisture, and other elements from damaging your lens. This filter is uncoated for greater durability when compared to multicoated filters. Its Water White glass construction is optically pure and maintains consistent light transmission and clarity.
Tiffen filters are made using ColorCore technology; a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. This filter measures 4 x 5.65″ / 101.6 x 143.5mm.
SKU: W4565SCLRUN -
Product Enquiry
Related products
-
Lens Filters
Tiffen 77mm Variable Neutral Density (ND) Filter
- Provides 2 to 8 Stops of Light Control
- Rotating Ring to Choose Degree of ND
- Eliminates Buying Many ND Filters
- Use to Create Blurs/Special Effects
Tiffen 77mm Variable ND Filter
The 77mm Variable Neutral Density Filter from Tiffen offers a unique way of maintaining total control over your depth of field as well as presenting an efficient way to create some special effects. The filter is designed with a built-in rotating ring that controls neutral density ranging from 2 – 8 stops (0.6- 2.4). The heavier the density, the slower your shutter speed will be. This longer exposure allows the shutter to remain open long enough to record the same amount of light but will also create movement within the shot. Another major benefit of this filter is the elimination of having to buy and carry around individual neutral density filters. With this one filter, you can rotate to the degree of ND you want – a real time and money saver.
Simply mount the filter on your lens, set it to “Min” density then frame and focus. Care must be taken with focusing at heavier densities to make sure focus is accurate. However, if it isn’t, switch to manual focus and rotate to the desired degree of filtration.
For example, if your standard exposure without the filter is 1/500 @ f/8 and you then set the filter to “Min”, you change the shutter speed to 1/125 at the same aperture – thereby losing 2 stops of speed while gaining a hint of “blur” in the image. If that’s not enough filtration, continue rotating the filter until you reach the shutter speed you desire. Using the above example, you can even get down to 1/2 second @ f/8 (8 stops). It should be noted that the calibration marks on the filter ring are to be used only for reference and should not be regarded as accurate settings for specific densities.
A Neutral Density filter is used to create some unusual special effects such as capturing the “blur” of the rippling water of a waterfall or the swirling effect of city traffic. Since it allows the use of slower shutter speeds in bright light, it becomes possible to create these special effects that would normally not be possible to capture without the filter. And, since it can also help to control your depth of field, it permits you to shoot at wider apertures. Ultimately, its value is in helping to prevent bright, overly washed out images shot in bright light.
The ColorCore process allows Tiffen to control the color and density of their filters, and the characteristics of special effects filters with much greater accuracy than typical dyed-in-the-mass filters, which usually exhibit color and density variations. In this way, Tiffen can better control the various densities of their filters and thereby create more exact degrees of filtration.
SKU: 77VND -
LED Lights
SWIT S-2410C Bi-Color Edge Mounted Soft Panel LED light
- 75-Degree Beam Angle
- Color Control from 3200 – 5600K
- 10-100% Flicker-Free Dimming
- Accepts V-Mount or L-Series Batteries
SWIT S-2410C Circular LED Panel
The S-2410C Bi-Color Edge Mounted Soft Panel LED light from Swit is a sleek fixture with a round, thin 2″ metal design and a 75-degree beam angle. The panel allows you to vary the color temperature from 3200 – 5600K or anywhere in between to match prevailing ambient color conditions or work creatively without resorting to filters. Flicker-free dimming from 10-100% brings another level of control. Settings and adjustments are displayed on the easy-to-read rear LCD screen. Both features maintain high color fidelity with a CRI of 96 and a TLCI rating of 98. Power requirements is yet another indication of the .versatility that’s key to the S-2410C’s design. The light will run on a V-Mount battery, dual Sony L-Series batteries, or on the included AC adapter, making it ready for worldwide use.
SKU: S-2410C -
Lens Filters
Tiffen Cordura Six Filter Pouch
- Holds Six Filters up to 82mm
- Cordura Nylon and Mesh
Tiffen Filter Pouch
The Tiffen Cordura Six Filter Pouch (Black) is a padded Cordura pouch made to hold 6 round or square filters up to 82mm. There are 6 mesh pockets to hold the filters.
- Folding Cordura filter pouch with 6 pockets to hold the filters
- Compatible with round or square filters up to 82mm
SKU: CORD6 -
Lens Filters
Tiffen Cordura Filter Pouch
- Holds 4 Filters Up to 77mm in Diameter
- Cordura Nylon and Mesh
Tiffen Filter Pouch
The Tiffen Cordura Four Filter Pouch is a padded Cordura nylon pouch made to hold four round filters up to 77mm in diameter. There are four mesh pockets to hold the filters.
- Folding Cordura nylon filter pouch with four pockets to hold the filters
- Compatible with round filters up to 77mm
SKU: CORD4 -
Lens Filters
Tiffen 6.6 x 6.6″ Soft/FX 1/2 Filter
- Soft-Focus Effect
- Reduces Subject Blemishes and Wrinkles
- Maintains Overall Sharpness
- 4mm-Thick Optical Glass Construction
Tiffen 6.6 x 6.6″ Soft/FX 1/2 Filter
The Tiffen 6.6 x 6.6″ Soft/FX 1/2 Filter can be applied to purposely reduce the appearance of blemishes and wrinkles in portraits or to apply a general soft-focus effect while maintaining overall sharpness. An array of small lenses distributed within the surface of this filter smooths fine lines and textures, which can be useful for creating a more flattering result of a subject.
This filter has a grade of 1/2. Grades of 1/8, 1/4, 1, 2, 3, 4, and 5 are also available where this filter type’s effect becomes approximately twice as strong with each grade number increase. When higher grade numbers are applied, a halation effect around highlights can be created to further enhance a subject’s appearance or produce a desired effect.
This filter is constructed from optical glass for clarity as well as color fidelity and is compatible with filter holders that can accommodate 4mm-thick, 6.6 x 6.6″ rectangular filters. It is made using ColorCore technology, a process that involves laminating the filter substrate between two pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch.
SKU: 6666SFX12
There are no reviews yet.