Tiffen 4 x 5.65″ T1 IR Filter
Available on backorder
- Infrared Control Filter
- For Digital Cinematography
- Blocks Near-IR to Infrared, 680 to 800nm
- 1.5x Filter Factor, 0.6 Stop
Tiffen 4 x 5.65″ IR Filter
The Tiffen 4 x 5.65″ T1 IR Filter is a near-infrared to infrared control filter that is designed for digital cinematography. Many digital motion-picture cameras are designed to maximize their ability to capture red hues, and in that process near-infrared or infrared contamination may occur. If the proportion of near-infrared or infrared light that reaches the sensor of a digital cinematography camera becomes too great, the results can show unwanted color shifts, particularly in dark areas of the frame such as shadows where the appearance of black is dominant.
When the Tiffen 4 x 5.65″ T1 IR Filter is used, near-infrared light waves beginning at 680nm are blocked by approximately 55%. Infrared light waves at higher frequencies are further impeded until nearly flat attenuation is achieved at 725 to 800nm. This process helps to ensure that the light that falls on the camera’s sensor is limited to the visible spectrum. Potential near-infrared or infrared color shifts are prevented or minimized, which preserves color accuracy throughout the frame. While a Tiffen T1/2 IR Filter that blocks infrared light waves down to 775 nanometers is sufficient for many cameras, others may have sensors that require a higher degree of near-infrared and infrared control, such as that provided by a Tiffen T1 IR Filter.
This filter is constructed from Water White glass for increased clarity as well as color fidelity. It is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass, grinding flat to a tolerance of 1/10,000th of an inch.
Available on backorderReport Abuse
|Dimensions||16.25 × 13 × 3 cm|
Tiffen W4565IR Specs
|Filter Type||IR Control|
|Rectangular Size||4 x 5.65″ / 101.6 x 143.5 mm|
|Package Weight||0.45 lb|
|Box Dimensions (LxWxH)||6.4 x 5.1 x 1.1″|
Based on 0 reviews
- Store Name: PROFMEDIA
- Vendor: PROFMEDIA
317G EL-Haram Street
- No ratings found yet!
Tiffen 4 x 4″ Glimmerglass 1/2 Diffusion Filter
Softens Fine Details Like Blemishes
Adds Slight Glow to Highlights
Minimal Highlight Flare
Tiffen 4 x 4″ Glimmerglass 1/2 Diffusion Filter
The 4 x 4″ Glimmerglass 1/2 Diffusion Filter from Tiffen is a unique way to give your portrait subject a clean, fresh and flattering appearance. This creative diffusion filter offers you a graded way to choose the degree of filration that will compliment your subject. While Glimmerglass softens fine details like blemishes, it also adds a gentle and flattering glow to the shot that adds an enhanced sense of glamor. The lighter grades of the filter are subtle while the higher grades will show noticeably more diffusion.
The filter also reduces contrast that will take the harshness off the shot and present your subject in a more flattering light. The main feature of Glimmerglass is that it produces a silver sparkle in the front of the filter that makes your subject feel more confident. That sparkle adds a psychological element to the shot that makes your subject more responsive and confident that the session is going well. In that sense, Glimmerglass is as effective to look at as it is to look through.
The 1/2 Glimmerglass is still subtle in its effect but generates enough softness to deliver a pleasing portrait with a soft glow around the highlights. Contrast is lower than the 1/4 version.
Tiffen’s ColorCore glass is produced through a process that entails permanently laminating the filter material in between two pieces of optical glass that are ground flat to tolerances of a ten-thousandth of an inch, then mounting them in precision aluminum rings.SKU: 44GG12
Tiffen 6.6 x 6.6″ 2 Straw Solid Color Filter
- 2 Density Solid Color Filter
- Warm Straw Coloration
- ColorCore Technology
Tiffen 6.6 x 6.6″ 2 Straw Filter
The Tiffen 6.6 x 6.6″ 2 Straw Solid Color Filter adds a warm, golden yellowish coloration across the entire image and helps to subdue overly bluish casts. The solid color design makes this filter well-suited to pairing with other filters for further control over the appearance of imagery. The 2 color density provides less straw coloration than the 3 density, but more than the 1 density filter.
This filter is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. It measures 6.6 x 6.6″ / 167.6 x 167.6mm.SKU: 6666ST2
On Camera Batteries
SWIT PB-M98S 14.4V 98Wh Pocket Battery with D-Tap and USB Output (V-Mount)
Compact Form Factor V-Mount Battery
98Wh, 6.8Ah Capacity
Provides Power Info for Sony and RED
Suitable for Small Cameras and Monitors
1 x 100W/8A D-Tap Output/Charger
1 x 5V/2A USB Type-A Output
Intelligent LED Indicators
Circuit ProtectionSKU: PB-M98S
Atomos Connect Convert | HDMI to SDI
Convert HDMI to SD/HD/3G-SDI
Lockable HDMI Connector
Locking Power Input Connector
Atomos HDMI to SDI Converter
Built into a rugged metallic housing, the Atomos Connect Convert | HDMI to SDI is a useful tool for converting HDMI signals to SDI for use in broadcast studios or with professional video equipment. The lockable HDMI connector ensures that locked HDMI cables won’t accidentally get unplugged if there’s a snag.SKU: ATOMCCVHS1