No products in the cart.
-5%
Chargers
SWIT S-3602F Dual Charger/Adapter for Sony NP-F970/770/960/950 Batteries
- Two-channel simultaneous charging
- Two 8.4V, 3.5A (total) DC adapting output sockets
- Compatible with SWIT S-8972/S-8970 and Sony L series batteries
- Includes the S-7500F dummy adapter to adapt to Sony HVR-V1E, HVR-Z1E, and Z7E and corresponding accessories
- Four-level LED charging indicators
SWIT S-3602F Dual Charger for Sony L-Series Batteries
The SWIT S-3602F Dual Charger/Adapter has two charging channels with 7-8.4 VDC, 2A output each for simultaneously charging two batteries. It is compatible with the SWIT S-8972/S-8970 and Sony L series batteries. Four-level LED charging indicators for each channel indicate the percentage of charge remaining.
The dual charger also has two 5.5/2.1mm DC pole sockets to provide 8.4V, 3.5A (total) DC adapting output. The S-7500F dummy adapter is included for adapting Sony HVR-V1E, HVR-Z1E, and Z7E cameras or equipment with the corresponding battery mounts. Both channels can simultaneously provide DC output to the connected cameras/accessories or one channel can be used to charge a battery by dropping it in, while the other can be used to adapt to a camera/accessory.
EGP2,839.00 EGP2,999.00
- Chargers
SWIT S-3602F Dual Charger/Adapter for Sony NP-F970/770/960/950 Batteries
- Two-channel simultaneous charging
- Two 8.4V, 3.5A (total) DC adapting output sockets
- Compatible with SWIT S-8972/S-8970 and Sony L series batteries
- Includes the S-7500F dummy adapter to adapt to Sony HVR-V1E, HVR-Z1E, and Z7E and corresponding accessories
- Four-level LED charging indicators
SWIT S-3602F Dual Charger for Sony L-Series Batteries
The SWIT S-3602F Dual Charger/Adapter has two charging channels with 7-8.4 VDC, 2A output each for simultaneously charging two batteries. It is compatible with the SWIT S-8972/S-8970 and Sony L series batteries. Four-level LED charging indicators for each channel indicate the percentage of charge remaining.
The dual charger also has two 5.5/2.1mm DC pole sockets to provide 8.4V, 3.5A (total) DC adapting output. The S-7500F dummy adapter is included for adapting Sony HVR-V1E, HVR-Z1E, and Z7E cameras or equipment with the corresponding battery mounts. Both channels can simultaneously provide DC output to the connected cameras/accessories or one channel can be used to charge a battery by dropping it in, while the other can be used to adapt to a camera/accessory.
SKU: S-3602F - On Camera Batteries
SWIT S-8972 7.2V, 47Wh Lithium-Ion DV Battery with DC Output for Sony L-Series Batteries
On Camera BatteriesSWIT S-8972 7.2V, 47Wh Lithium-Ion DV Battery with DC Output for Sony L-Series Batteries
Rechargeable Li-ion battery pack
Replacement for Sony L-Series NP-F770/970/960/950 batteries
7.2V, 47Wh capacity
4-level LED power indicator, display remaining power in percentage
Built-in 7.2V pole-tap DC output socketThe S-8972 7.2V, 47Wh Lithium-Ion DV Battery with DC Output from SWIT is a replacement for the Sony L-Series NP-F770/970/960/950 batteries. It comes with a built-in 7.2V pole-tap DC output to power the camera and other on-camera devices simultaneously. The 4-level LED indicator gives you a quick view of the remaining power before using the battery.
The battery can be charged using the SWIT S-3602F Dual Channel Charger . Alternatively, the battery can be charged via the pole-tap outlet using the SWIT S-3010D Portable Pole-Tap Charger.
SKU: S-8972
EGP3,968.00 for 2 item(s)
NOTE
One dummy adapter is included to adapt one of the dual DC pole sockets to a compatible camera. To use both adapting outputs simultaneously, an additional dummy adapter must be purchased.
| Weight | 0.75 kg |
|---|---|
| Dimensions | 23.1 × 19.4 × 6.6 cm |
SWIT S-3602F Specs
| Mount / Series Type | Sony L-Series |
Electrical
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
| Output Voltage | 8.4 VDC at 1.8 A |
| Chemistry | Lithium-Ion |
| Maximum Wattage | 50 W |
Environmental
| Operating Temperature | 32 to 104°F / 0 to 40°C |
General
| Dimensions | 5.4 x 4.3 x 1.9" / 136 x 110 x 47 mm |
| Weight | 12.7 oz / 360 g |
Packaging Info
| Package Weight | 1.645 lb |
| Box Dimensions (LxWxH) | 9.1 x 7.65 x 2.6" |
Based on 0 reviews
Be the first to review “SWIT S-3602F Dual Charger/Adapter for Sony NP-F970/770/960/950 Batteries”
Vendor Information
- Store Name: PROFMEDIA
- Vendor: PROFMEDIA
- Address: 317G EL-Haram Street
Giza
Giza
12553 - No ratings found yet!
- Lens Filters
Tiffen 6.6 x 6.6″ 4 Point/2mm Grid Star Effect Glass Filter
- Creates multiple points of light, or “stars,”
- Tiffen’s ColorCore glass
- Lines in one direction produce a two-pointed star, just a streak through the center of the light
Tiffen 6.6 x 6.6″ 4 Point Star Filter
Tiffen 6.6 x 6.6″ 4 Point/2mm Grid Star Effect Glass Filter create multiple points of light, or “stars,” streaking outward from a central light source. This can make lighting within the scene take on a more glittering, glamorous appearance. This effect is produced by a series of thin lines etched into the flat optical surface of a clear filter.
The size and brightness of the star lines produced are first a function of the size, shape, and brightness of the light source.
In the Box
- Tiffen 6.6 x 6.6″ 4 Point/2mm Grid Star Effect Glass Filter
- 1-Year Warranty
SKU: 6666STR42 - BNC to BNC Cables
LanParte HD-SDI BNC to BNC Cable (20m)
HD-SDI 3G-SDI CABLE (20M)
Pure coaxial transmission
Standard BNC connectorsLanParte HD-SDI BNC to BNC Cable
The HD-SDI BNC to BNC Cable from Lanparte is a BNC male to BNC male coaxial transmission cable featuring a 0.8mm copper conductive core. The cable supports the transfer of both serial data and video signals, particularly HD-SDI quality video signals.SKU: SDI-2000 - Power Adapter Cables
LanParte D-Tap to DC Barrel Power Cable for Blackmagic Camera (60cm)
- Power 2.5K or 4K Blackmagic Camera from D-Tap Sources
LanParte D-Tap to DC Barrel Cable
This D-Tap to DC Barrel Power Cable from Lanparte runs 24″ long and allows you to power your 2.5K or 4K Blackmagic Camera directly from a D-Tap-equipped power source. Power the camera from select batteries, battery plates, and other devices.
Note: Please pay attention to the +/- polarity of the D-Tap connector to avoid damaging your camera.SKU: DC-55-25 - LED Lights
SWIT PL-E90DS Portable Bi-Color SMD DMX LED Panel
Panel Surface Area: 20.67 x 10.16″
Beam Angle Spread: 70°
Color Temperature: 2700 to 6500K
CRI: 98, TLCI: 99SWIT PL-E90Ds Bi-Color LED Panel
The PL-E90DS Portable Bi-Color SMD DMX LED Panel with V-Mount Battery Plate from SWIT is a low-profile fixture with a thin 1.8″ design and a 70° beam angle for wide coverage. The continuous variable color temperature range from 2700 to 6500K makes it possible to match existing ambient light conditions, other fixtures, or to work creatively without resorting to filters. The durable metal chassis is passively convection-cooled for completely silent operation, making it well suited to shooting applications when audio is being recorded.Built around 480 high-efficiency LED bulbs results in a high CRI: 98, TLCI: 99 rating, ensuring accurate color rendition, skin-tone rendering, and flicker-free dimming from 0 to 100%. Color temperature and brightness functions can be adjusted locally on the fixture using intuitive controls, or remotely via onboard DMX.. Settings are displayed on the large, easy-to-read LCD screen on the rear of the panel. The PL-E90DS may be used anywhere in the world by using the included multi-voltage AC adapter, but can also be operated by optional V-Mount batteries when mains power is unavailable.
SKU: PL-E90DS
Product Enquiry
Related products
- LED Lights
SWIT S-2840 400W RGBW LED Panel
- 560pcs RGBW SMD LEDs
- 400W light output
- 10000Lux @ 1 meter
- 2800-10000K color temperature
- CCT mode with G/M adjustment
- HIS / CIE / RGB color mode
- 20x Rosco and 20x Lee Gels
- CRI 95, TLCI 93
- 8-ch DMX control
- IOS/Android APP control
- SWIT S-2840 RGBW LED Panel
- 400W RGBW 1:1 Panel
- 560pcs SMD LEDs
S-2840 is an RGBW 2:1 panel LED light, adopts 560pcs SMD LEDs, 400W power output, 10000Lux @ 1 meter.
Smart Phone APP control
IOS and Android
S-2840 has a control panel on the rear side, and can also be operated by Smart Phone APP.
IOS APP: App Store, search “RGB Panel”CCT Mode
2800K-10000K, G/M adjustmentThe color temperature mode achieves 2800K-10000K continuous adjustment and Green / Magenta ±1.00 adjustment.
RGB Mode
HSI, CIE and RGB pick
Support HSI mode, CIE mode, RGB mode to pick colors, by rear control panel value setting or smart phone APP.
GEL Mode
Built-in Rosco and Lee GelsS-2840 has built-in 20x Rosco Gels and 20x Lee Gels to easily switch by rear control panel or smart phone APP.
Power Input
AC, V-mount DC
S-2840 supports SpeakOn AC power input and 4-pin XLR DC 14.8-26V input. Provides with standard V-mount plate and recommended to use SWIT high load battery S-8183S, PB-R290S, PB-H290S or PB-H260S to power.(The output power will be limited to 200W if using DC-IN or V-mount battery)
SKU: S-2840 - Chargers
SWIT 4-Ch Simultanoues Chager For The Swit S-8PE6 And Canon LP-E6
- 4-ch simultaneous charging
- 2A charging current per channel
- Snap-on exchangeable DV plates
- Mixed types of DV batteries charging
- U/F/D/B/C/I/V/E plates supported
- 4-LED charging indicators
SWIT 4-Ch Simultanoues Chager
The 4-channel DV Charger from SWIT is a universal charger capable of charging up to 4 DV batteries simultaneously, with 2A charging current per channel. Users can exchange different types of battery plate to charge different types of DV batteries together.
You can select the following snap-on quick exchangeable DV plates to mount on LC-D421, to charge different batteries:
- KA-C10U: SONY BP-U type
- KA-C10F : SONY NP-F type
- KA-C10D : Panasonic CGA, AG-VBR59
- KA-C10B : Panasonic VW-VBG6
- KA-C10C: Canon BP-945 type
- KA-C10I: SSL-JVC50 type
- KA-C10V : JVC BN-VF823 type
- KA-C10E : Canon LP-E6
SKU: LC-D421E - LED Lights
SWIT PL-E90DS Portable Bi-Color SMD DMX LED Panel
Panel Surface Area: 20.67 x 10.16″
Beam Angle Spread: 70°
Color Temperature: 2700 to 6500K
CRI: 98, TLCI: 99SWIT PL-E90Ds Bi-Color LED Panel
The PL-E90DS Portable Bi-Color SMD DMX LED Panel with V-Mount Battery Plate from SWIT is a low-profile fixture with a thin 1.8″ design and a 70° beam angle for wide coverage. The continuous variable color temperature range from 2700 to 6500K makes it possible to match existing ambient light conditions, other fixtures, or to work creatively without resorting to filters. The durable metal chassis is passively convection-cooled for completely silent operation, making it well suited to shooting applications when audio is being recorded.Built around 480 high-efficiency LED bulbs results in a high CRI: 98, TLCI: 99 rating, ensuring accurate color rendition, skin-tone rendering, and flicker-free dimming from 0 to 100%. Color temperature and brightness functions can be adjusted locally on the fixture using intuitive controls, or remotely via onboard DMX.. Settings are displayed on the large, easy-to-read LCD screen on the rear of the panel. The PL-E90DS may be used anywhere in the world by using the included multi-voltage AC adapter, but can also be operated by optional V-Mount batteries when mains power is unavailable.
SKU: PL-E90DS - Batteries & Power Accessories, Battery Chargers
Canon LC-E6 Charger for LP-E6 Battery Pack
Use with Canon:-
EOS 5D Mark II/III/IV,
5DS/5DS R,
6D, 6D Mark II
7D,
60D, 70D & 80DHighlights:-
For LP-E6 and LP-E6N batteries
Charges in approximately 2 hours
World-wide useMobile Charger for both LP-E6 and LP-E6N batteries
SKU: 3349B001AA
There are no reviews yet.