No products in the cart.
LED Lights
SWIT S-2840 400W RGBW LED Panel
Availability:
Out of stock
- 560pcs RGBW SMD LEDs
- 400W light output
- 10000Lux @ 1 meter
- 2800-10000K color temperature
- CCT mode with G/M adjustment
- HIS / CIE / RGB color mode
- 20x Rosco and 20x Lee Gels
- CRI 95, TLCI 93
- 8-ch DMX control
- IOS/Android APP control
- SWIT S-2840 RGBW LED Panel
- 400W RGBW 1:1 Panel
- 560pcs SMD LEDs
S-2840 is an RGBW 2:1 panel LED light, adopts 560pcs SMD LEDs, 400W power output, 10000Lux @ 1 meter.
Smart Phone APP control
IOS and Android
S-2840 has a control panel on the rear side, and can also be operated by Smart Phone APP.
IOS APP: App Store, search “RGB Panel”
CCT Mode
2800K-10000K, G/M adjustment
The color temperature mode achieves 2800K-10000K continuous adjustment and Green / Magenta ±1.00 adjustment.
RGB Mode
HSI, CIE and RGB pick
Support HSI mode, CIE mode, RGB mode to pick colors, by rear control panel value setting or smart phone APP.
GEL Mode
Built-in Rosco and Lee Gels
S-2840 has built-in 20x Rosco Gels and 20x Lee Gels to easily switch by rear control panel or smart phone APP.
Power Input
AC, V-mount DC
S-2840 supports SpeakOn AC power input and 4-pin XLR DC 14.8-26V input. Provides with standard V-mount plate and recommended to use SWIT high load battery S-8183S, PB-R290S, PB-H290S or PB-H260S to power.
(The output power will be limited to 200W if using DC-IN or V-mount battery)
EGP38,999.00
Out of stock
Report Abuse- LED Lights
SWIT S-2840 400W RGBW LED Panel
- 560pcs RGBW SMD LEDs
- 400W light output
- 10000Lux @ 1 meter
- 2800-10000K color temperature
- CCT mode with G/M adjustment
- HIS / CIE / RGB color mode
- 20x Rosco and 20x Lee Gels
- CRI 95, TLCI 93
- 8-ch DMX control
- IOS/Android APP control
- SWIT S-2840 RGBW LED Panel
- 400W RGBW 1:1 Panel
- 560pcs SMD LEDs
S-2840 is an RGBW 2:1 panel LED light, adopts 560pcs SMD LEDs, 400W power output, 10000Lux @ 1 meter.
Smart Phone APP control
IOS and Android
S-2840 has a control panel on the rear side, and can also be operated by Smart Phone APP.
IOS APP: App Store, search “RGB Panel”CCT Mode
2800K-10000K, G/M adjustmentThe color temperature mode achieves 2800K-10000K continuous adjustment and Green / Magenta ±1.00 adjustment.
RGB Mode
HSI, CIE and RGB pick
Support HSI mode, CIE mode, RGB mode to pick colors, by rear control panel value setting or smart phone APP.
GEL Mode
Built-in Rosco and Lee GelsS-2840 has built-in 20x Rosco Gels and 20x Lee Gels to easily switch by rear control panel or smart phone APP.
Power Input
AC, V-mount DC
S-2840 supports SpeakOn AC power input and 4-pin XLR DC 14.8-26V input. Provides with standard V-mount plate and recommended to use SWIT high load battery S-8183S, PB-R290S, PB-H290S or PB-H260S to power.(The output power will be limited to 200W if using DC-IN or V-mount battery)
SKU: S-2840 - On Camera Batteries
SWIT S-8082S 95Wh V-Mount Battery
Li-ion battery, no memory effect
14.4V, 95Wh large capacity
D-tap output socket
4-level LED power indicator
Metal V-mount plate
Wireless receiver mount
Safe air transportationThe lightweight S-8082S 95Wh V-Mount Battery from SWIT comes with a D-tap socket for camera light or other equipment. It has a 4-level LED indicator to give the user a view of remaining power before mounting to camera. The Li-ion contents of S-8082S comply with the IATA safe air transportation regulations and are not restricted from carry-on or from shipping as air cargo.
SKU: S-8082S - Chargers
SWIT SC-302S 2-Channel Sequential Charger for V-Mount Batteries
Charging V-mount batteries
2-ch sequential charging
1.9A charging current per channel
LED charging indicators
Support AC to 4-pin XLR output
Light weight and portableSWIT SC-302S Dual Charger
The portable charger SC-302S can charge 2 V-mount batteries sequentially. It has LED charging indicators on the front panel, indicates the real time capacity of each channel by different colors. The charger has a 4-pin XLR female connector on the front panel. Connected with SWIT S-7102 XLR female to male cable, it can be used as AC-DC adapter of DC 14-20V, 1.9A output.SKU: SC-302S
EGP46,407.00 for 3 item(s)
| Weight | 20.6 kg |
|---|---|
| Dimensions | 84 × 61 × 23 cm |
S-2840 Panel Specs
Light Fixture
| Color Temperature | 10,000 to 2800K ± 150K |
| Color Accuracy Standard | CRI 95 at 3200K |
| Cooling System | Fan/Passive Combo |
| Dimming | Yes, 0 to 100% |
| Display | Yes |
| Housing Material | Metal |
| Photometrics | 10000Lux @ 1meter |
| Fixture Dimensions | Flood: 23.6 x 11.7 x 5.9" / 59.9 x 29.7 x 15.0 cm |
| Fixture Weight | 14.4kg |
Connectors
| Battery Plate | V-Mount Battery |
| Power Input Connector | AC-IN 400W; DC-IN 200W |
Mounting
| Yoke Mount | None |
| Fixture Mount | 1-1/8" Stud |
| Accessory Mount | None |
Remote Operation
| Remote Control Type | Android/iOS Application |
Power
| AC Input Power | 90 to 264 VAC, 50 / 60 Hz |
| Power Source | AC Adapter, External Battery |
| Max Power Consumption | 400 W |
Power Supply
| Power Supply Output | 36 VDC |
| Power Supply Power Connector | powerCON Input |
| Power Supply Dimensions | 6.0 x 4.0 x 13.0" / 15.2 x 10.2 x 33.0 cm |
| Power Supply Weight | 7.1 lb / 3.22 kg |
Physical
| Operating Temperature | 32 to 113°F / 0 to 45°C |
Packaging Info
| Package Weight | 45.5 lb |
| Box Dimensions (LxWxH) | 33 x 24 x 9" |
Based on 0 reviews
Be the first to review “SWIT S-2840 400W RGBW LED Panel”
Vendor Information
- Store Name: PROFMEDIA
- Vendor: PROFMEDIA
- Address: 317G EL-Haram Street
Giza
Giza
12553 - No ratings found yet!
- LED Lights
SWIT PL-E60S Portable Bi-Color SMD LED Panel (V-Mount)
- Panel Surface Area: 257×257mm
- Beam Angle Spread: 70°
- Color Temperature: 2700 to 6500K
- CRI: 98, TLCI: 99
SWIT PL-E60S LED Panel
The PL-E60S Portable Bi-Color SMD LED Panel with V-Mount Battery Plate from SWIT is a low-profile fixture with a thin 1.8″ design and a 70° beam angle for wide coverage. The continuous variable color temperature range from 2700 to 6500K makes it possible to match existing ambient light conditions, other fixtures, or to work creatively without resorting to filters. The durable metal chassis is passively convection-cooled for completely silent operation, making it well suited to shooting applications when audio is being recorded.
Built around 320 high-efficiency LED bulbs results in a high CRI: 98, TLCI: 99 rating, ensuring accurate color rendition, skin-tone rendering, and flicker-free dimming from 0 to 100%. Color temperature and brightness functions can be adjusted locally on the fixture using intuitive controls. Settings are displayed on the large, easy-to-read LCD screen on the rear of the panel. The PL-E60S may be used anywhere in the world by using the included multi-voltage AC adapter, but can also be operated by optional V-Mount batteries when mains power is unavailable.
SKU: PL-E60S - On Camera Batteries
SWIT S-8320S 80Wh Heavy Duty Digital Li-ion Battery
Single-row cells slim design
D-tap DC output socket
Remaining run time indicators
Display power info in SONY cameras
Maximum 100W, 8A load
V-mountSWIT S-8320S 80Wh V-Mount Battery
The 80Wh Heavy Duty Digital Li-ion Battery from SWIT has dual housing structure including an inner cell cage and outer anti-shock housing with rubber covers. The new structure makes the battery strong enough, as well as IP66 water/dust proof. It adopts high-load cells, provides up to 200W/16A constant power output, capable of powering higher draw equipment simultaneously, especially the CINE cameras. The new Power Check LED tells not only the remaining power percentage, but also the remaining running time on the equipment, accurate to 15 minutes.SKU: S-8320S - Lens Filters
Tiffen 4 x 4″ Glimmerglass 1/2 Diffusion Filter
Softens Fine Details Like Blemishes
Adds Slight Glow to Highlights
Reduces Contrast
Minimal Highlight FlareTiffen 4 x 4″ Glimmerglass 1/2 Diffusion Filter
The 4 x 4″ Glimmerglass 1/2 Diffusion Filter from Tiffen is a unique way to give your portrait subject a clean, fresh and flattering appearance. This creative diffusion filter offers you a graded way to choose the degree of filration that will compliment your subject. While Glimmerglass softens fine details like blemishes, it also adds a gentle and flattering glow to the shot that adds an enhanced sense of glamor. The lighter grades of the filter are subtle while the higher grades will show noticeably more diffusion.The filter also reduces contrast that will take the harshness off the shot and present your subject in a more flattering light. The main feature of Glimmerglass is that it produces a silver sparkle in the front of the filter that makes your subject feel more confident. That sparkle adds a psychological element to the shot that makes your subject more responsive and confident that the session is going well. In that sense, Glimmerglass is as effective to look at as it is to look through.
The 1/2 Glimmerglass is still subtle in its effect but generates enough softness to deliver a pleasing portrait with a soft glow around the highlights. Contrast is lower than the 1/4 version.
Tiffen’s ColorCore glass is produced through a process that entails permanently laminating the filter material in between two pieces of optical glass that are ground flat to tolerances of a ten-thousandth of an inch, then mounting them in precision aluminum rings.
SKU: 44GG12 - LED Lights
SWIT S-2241 Bi-Color SMD On-Camera LED Light (Sony NP-F Mount)
153 ultra-bright, bi-color, surface-mounted LEDs
Wide beam angle of 120° (half-declined at 68°)
3200 to 5600K continuously adjustable color temperature
Up to 20W power, 640 lux at 3.3′ center
10 to 100% adjustable dimmer
CRI (Color Rendering Index) of 92 and TLCI (Television Lighting Consistency Index) of 97
Includes a snap-on Sony NP-F type battery plate for Sony NP-F970/F770 and SWIT S-8972, S-8970, and S-8770 batteries
Accepts 6 to 17 VDC input via D-Tap
Includes a magnetic diffuser cover
Includes a ball head with 1/4″-20 screw and cold-shoe mountSWIT S-2241 On-Camera LED Light
The S-2241 Bi-Color On-Camera LED Light with Sony NP-F battery mount from SWIT features 153 ultra-bright, surface-mounted LEDs. It comes with a polycarbonate diffuser that attaches on the front of the light fixture via magnets. The diffuser helps generate an equally spread, glareless light for close interview and professional film lighting. This LED light offers a 120° wide beam angle with a half-declined beam at 68°, an illumination of 640 lux at 3.3′, and a CRI rating of 92. The light output can be adjusted from 10 to 100% with the onboard dimmer. The color temperature can also be continuously adjusted from 3200K to 5600K via the knob on the rear panel.The LED light comes with an interchangeable, snap-on Sony NP-F type battery plate that accepts Sony NP-F970 and NP-F770 batteries, and SWIT S-8972, S-8970, and S-8770 batteries. It operates on 6 to 17 VDC wide voltage input, which can be supplied from 7.2V camera batteries. It can also accept power from D-Tap power output sockets, such as 14.4V V-mount or Gold mount batteries, battery plates, or camera handles using the included D-Tap cable. The light can be mounted on a tripod via a 1/4″-20 screw head, and can be fixed on the camera with the cold-shoe mount ball head.
SKU: S-2241F
Product Enquiry
Related products
- Chargers
SWIT SC-302S 2-Channel Sequential Charger for V-Mount Batteries
Charging V-mount batteries
2-ch sequential charging
1.9A charging current per channel
LED charging indicators
Support AC to 4-pin XLR output
Light weight and portableSWIT SC-302S Dual Charger
The portable charger SC-302S can charge 2 V-mount batteries sequentially. It has LED charging indicators on the front panel, indicates the real time capacity of each channel by different colors. The charger has a 4-pin XLR female connector on the front panel. Connected with SWIT S-7102 XLR female to male cable, it can be used as AC-DC adapter of DC 14-20V, 1.9A output.SKU: SC-302S - On Camera Monitors
SWIT S-1073F 7″ Full HD Waveform LCD Monitor
7″ non-glaring LED-backlit monitor
Native resolution of 1920 x 1200
2K/3G/HD/SD-SDI input and loopout
16-channel embedded audio meters with alertSWIT S-1073F On Camera Monitor
The SWIT S-1073F Monitor adopts a 7″ TFT LCD panel with optical bonding technology. The LCD offers a native resolution 1920 x 1200 and 160° wide viewing angle. It features two 3G-SDI (Level A/B) input, one HDMI input, and one CVBS input. It also features one SDI output (SDI loop through output/HDMI converted to SDI output), one HDMI output, and one headphone and speaker audio output. The monitor is suitable for outdoor on-camera video monitoring thanks for the aluminum alloy housing and foldable sun hood. It supports 6.5 to 36 VDC input via a 5.5mm lockable DC socket, and comes installed with a S-7006F SONY NP-F battery plate to power the Sony NP-F970/770, and SWIT S-8972, S-8970, and S-8770 batteries.The monitor supports video analysis assistant patterns including Waveform (Y/Pb/Pr/R/G/B), Vectorscope, and Histogram (R/G/B/Y) to convert the digital video quality info (Luma, Color, Saturation, etc.) into patterns, and it has select display position (Up/Down/Left/Right), size, color, and translucence. The patterns can be switched on/off individually.
SKU: S-1073FF LUXURY PACKAGE - LED Lights
SWIT PL-E90DS Portable Bi-Color SMD DMX LED Panel
Panel Surface Area: 20.67 x 10.16″
Beam Angle Spread: 70°
Color Temperature: 2700 to 6500K
CRI: 98, TLCI: 99SWIT PL-E90Ds Bi-Color LED Panel
The PL-E90DS Portable Bi-Color SMD DMX LED Panel with V-Mount Battery Plate from SWIT is a low-profile fixture with a thin 1.8″ design and a 70° beam angle for wide coverage. The continuous variable color temperature range from 2700 to 6500K makes it possible to match existing ambient light conditions, other fixtures, or to work creatively without resorting to filters. The durable metal chassis is passively convection-cooled for completely silent operation, making it well suited to shooting applications when audio is being recorded.Built around 480 high-efficiency LED bulbs results in a high CRI: 98, TLCI: 99 rating, ensuring accurate color rendition, skin-tone rendering, and flicker-free dimming from 0 to 100%. Color temperature and brightness functions can be adjusted locally on the fixture using intuitive controls, or remotely via onboard DMX.. Settings are displayed on the large, easy-to-read LCD screen on the rear of the panel. The PL-E90DS may be used anywhere in the world by using the included multi-voltage AC adapter, but can also be operated by optional V-Mount batteries when mains power is unavailable.
SKU: PL-E90DS - LED Lights
SWIT S-2410C Bi-Color Edge Mounted Soft Panel LED light
- 75-Degree Beam Angle
- Color Control from 3200 – 5600K
- 10-100% Flicker-Free Dimming
- Accepts V-Mount or L-Series Batteries
SWIT S-2410C Circular LED Panel
The S-2410C Bi-Color Edge Mounted Soft Panel LED light from Swit is a sleek fixture with a round, thin 2″ metal design and a 75-degree beam angle. The panel allows you to vary the color temperature from 3200 – 5600K or anywhere in between to match prevailing ambient color conditions or work creatively without resorting to filters. Flicker-free dimming from 10-100% brings another level of control. Settings and adjustments are displayed on the easy-to-read rear LCD screen. Both features maintain high color fidelity with a CRI of 96 and a TLCI rating of 98. Power requirements is yet another indication of the .versatility that’s key to the S-2410C’s design. The light will run on a V-Mount battery, dual Sony L-Series batteries, or on the included AC adapter, making it ready for worldwide use.
SKU: S-2410C - On Camera Batteries
SWIT S-8770 31Wh 7.2V NP-F-Type Lithium-Ion Battery Pack
Li-ion battery pack of 7.2V nominal voltage
Comparable to SONY L series DV batteries
Display remaining power info on camera viewfinder
31Wh / 4.4Ah capacity
Multiple circuit protectionsSWIT S-8770 L-Series Battery
S-8770 is a 7.2V, 31.7Wh Li-ion DV battery compatible with SONY L series NP-F770/970/960/950 batteries for Sony cameras HVR-Z5 & Z7, HVR-V1E, HVR-Z1E, HVR-HD1000E und HXR-NX5E. The build-in intelligent circuit has multiple protections of abnormal current, voltage and temperature.31Wh / 4.4Ah Capacity
With 7.2V nominal voltage, the S-8770 has 31Wh / 4.4Ah capacity, and can run approx 3.5 hours on SONY HVR-Z1 camcorder when LCD monitor is on.Easy Charging
The S-8770 can be charged on SWIT Dual channel charger S-3602F and SONY original charger. It takes about 2 hours and 50 minutes to charge from empty to 100%.SKU: S-8770
There are no reviews yet.