Available on backorder
The SWIT PB-S98S 14.4V 98Wh Dual D-Tap Heavy-Duty Digital Battery, featuring a V-mount, has a short, compact design and provides up to 100W/8A continuous output. While it’s suitable for most cameras and devices and it can power an ENG camera for approximately 3 hours, its small size also makes it ideal for drones and other mobile applications. In addition to this, the PB-S98S offers two D-Tap outputs for powering accessories and a USB port for charging mobile devices.
The battery has an intelligent LCD that displays remaining runtime in minutes when the battery is in use and as a percentage value when not in use or when charging. When remaining runtime is less than 15 minutes, the LCD will flash as a warning. It’ll also show a warning signal with a specific warning code if the battery detects over-discharging, over-charging, circuit issues, and the like. A long press of the power-check button will display the battery’s cycle times on the LCD. The PB-S98S also communicates runtime info to RED and Sony viewfinders.
EGP4,299.00
Available on backorder
Report Abuse| Weight | 0.8 kg |
|---|---|
| Dimensions | 13 × 10 × 6.5 cm |
| Mount / Series Type | V-Mount |
| Chemistry | Lithium-Ion |
| Capacity (Wh) | 98 Wh |
| Amp-Hours | 6.8 Ah |
| Output Voltage | 14.4 VDC |
| Maximum Load | 100 W, 8 A |
| Accessory Port | 2 x D-Tap |
| Maximum Load (Accessory Port) | 100 W, 8 A (D-Tap) |
| USB Output | 5 V, 2 A |
| Dimensions (W x H x D) | 3.74 x 4.76 x 2.32″ / 9.5 x 12.1 x 5.9 cm |
| Weight | 1.76 lb / 0.8 kg |
The 38 cm LP-E6 Dummy Battery from Tilta connects your Canon LP-E6 battery-powered camera or compatible accessory via a D-Tap power port. Designed for use with the Tilta Universal Battery Plate, this adapter can be also used with other compatible power sources.
The SWIT S-3602F Dual Charger/Adapter has two charging channels with 7-8.4 VDC, 2A output each for simultaneously charging two batteries. It is compatible with the SWIT S-8972/S-8970 and Sony L series batteries. Four-level LED charging indicators for each channel indicate the percentage of charge remaining.
The dual charger also has two 5.5/2.1mm DC pole sockets to provide 8.4V, 3.5A (total) DC adapting output. The S-7500F dummy adapter is included for adapting Sony HVR-V1E, HVR-Z1E, and Z7E cameras or equipment with the corresponding battery mounts. Both channels can simultaneously provide DC output to the connected cameras/accessories or one channel can be used to charge a battery by dropping it in, while the other can be used to adapt to a camera/accessory.
There are no reviews yet.