Available on backorder
EGP1,799.00 EGP1,999.00
Available on backorder
Report Abuse| Form Factor | Stand/Boom-Mount |
| Sound Field | Mono |
| Operating Principle | Line Gradient |
| Capsule | Electret Condenser |
| Diaphragm | 0.5″ / 12.70 mm |
| Polar Pattern | Supercardioid |
| Orientation | End Address |
| Circuitry | Solid-State (JFET) |
| Pad | None |
| High-Pass Filter | None |
| Tone Adjustment | None |
| Indicators | None |
| On-Board Controls | None |
| Windscreen | Foam (Included) |
| Frequency Range | 100 Hz to 16 kHz |
| Maximum SPL | 120 dB SPL (1 kHz, 1% THD, 1-Kilohm Load) |
| Off-Axis Rejection | 4 dB at 60° 16 dB at 120° 12 dB at 180° |
| Sensitivity | -35 dBV/Pa at 1 kHz |
| Dynamic Range | 96 dB |
| Signal-to-Noise Ratio | 60 dB A-Weighted |
| Equivalent Noise Level | 34 dB A-Weighted |
| Output Connectors | 1 x 1/8″ / 3.5 mm TRS |
| Cable Length | 7.87 to 13.78″ / 20 to 35 cm |
| Number of Conductors | 2 |
| Wireless Connectivity | None |
| Operating Voltage | 2.5 V |
| Operating Current Consumption | 330 µA (Plug-In Power) |
| Color | Black |
| Mounting | 3/8″-16 Female, Camera-Mount, Shockmount (with Included Hardware) |
| Construction Material | ABS |
| Dimensions | ø: 3.11 x L: 6.57″ / ø: 79 x L: 167 mm |
| Weight | 2.58 oz / 73 g |
| Package Weight | 0.43 lb |
| Box Dimensions (LxWxH) | 9.95 x 4.9 x 2.9″ |
The AD200 TTL Pocket Flash Kit from Godox is built around a unique flash light source that has a standard speedlite head and a bare bulb head that give you the option of 2 distinctly different qualities of light. The kit comes with the 2 heads, lithium battery, charger and carry case.
The speedlight head outputs the standard look of an on-camera flash that can be modified using an optional softbox, beauty dish or umbrella. The bare bulb head features a removable flash tube and produces 360 degrees of soft, bright, nearly shadowless light. The head uses optional reflectors that focus the beam angle and give you directional control. The AD200 has impressive core features such as 200 Ws of power adjustable in 8 steps from 1/128 to 1/1, recycling from 0.01 to 2.1 seconds and flash durations as short as 1/11,300 sec. The flash runs on a removal rechargeable lithium battery that will give you up to 500 full power flashes and thousands of lower power flashes.
The AD200 has 3 flash modes: Manual, TTL, and Multi (Stroboscopic). Manual outputs the user’s choice of power, modeling light, first or second curtain sync, etc. Multi controls the stroboscopic rate up to 90 times (90 Hz). TTL takes advantage of the flash head’s built-in X1 receiver. Optional X1 TTL transmitters are available for Nikon, Canon, Sony, Olympus, Panasonic and Fuji cameras. They will also detect a separately purchased LED head. The 32-channel wireless system controls flash mode, first and second curtain sync, High-speed sync up to 1/8000 sec, power level, modeling lamp and ready beeper at distances up to 328′. Firmware updates are obtainable on the Godox website.
The Sensei 77-82mm Step-Up Ring permits the use of 82mm threaded filters on lenses with 77mm filter threads. It features a lightweight, aluminum-alloy construction that has a corrosion-resistant, black anodized finish for durability.
The RODE SC6-L is an interface designed to record two-person interviews directly to your iOS device. The interface accepts the inputs of the RODE smartLav+ microphone, multiple types of RODE VideoMics (in conjunction with TRRS adapters), and third-party microphones with the appropriate TRRS connection points.
At one end of the SC6-L, you’ll find two 3.5mm TRRS jacks. These are for your microphones. Between the two TRRS jacks is a 3.5mm headphone output for monitoring the incoming signal. At the other end of the interface you’ll see the lightning connector, which routes digital signal into your iOS device. The SC6-L facilitates audio recording at resolutions of 24-bit and sample rates of up to 48 kHz, making it a broadcast-quality unit.
The SC6-L works with the RODE Reporter App. This app allows you to change preamp gain and switch between record modes. You can also turn direct monitoring on or off from the app. Other apps work with the SC6-L such as the onboard Camera app, GarageBand, Voice Memos, and others. The SC6-L is compatible with devices sporting iOS 11 and later.
For Mobile Journalist, Videographer
Built-In Omni Mic & 3.5mm Mic Input
Miniature Clip-On Transmitter
Miniature Clip-On Receiver
Rode Wireless Go Digital Microphone System
Confidently and quickly run-and-gun in the world of wireless audio with the black Rode Wireless GO, an incredibly compact true wireless microphone system offering secure Series III 2.4 GHz digital transmission and easy operability for mobile journalists, videographers, and vloggers of any experience level. The system is ready to go at the press of a button; you can focus on getting the shot knowing that the Wireless GO is delivering quality audio at a range of up to 230 feet. There are no menus and no finicky dials, just simple power-on-and-go functionality and a bright, informative LCD screen showing you what you need to see.
Capture top-notch audio quality even if you don’t have an external mic; the Wireless GO is a complete system comprised of a miniature clip-on transmitter with a built-in true wireless omnidirectional microphone capsule, a miniature clip-on receiver, and a slew of accessories—everything you need to get up and running in the field. Clip the transmitter onto your subject’s clothing or belt, clip the receiver near your recording device, then connect the receiver’s output to your recorder’s input. Whether you use the transmitter’s convenient, high-caliber integrated mic or hook up the companion Rode Lavalier GO (available separately), you’re assured to achieve clear, crisp, intelligible audio.
In the Box
Rode Wireless GO Compact Digital Wireless Microphone System (2.4 GHz, Black)
2 x Fur Windshields
Storage Pouch
Rode SC2 Right-Angle 3.5mm TRS Coiled Patch Cable
2 x USB Type-A to USB Type-C Cable
There are no reviews yet.