Available on backorder
EGP12,999.00 EGP13,749.00
Available on backorder
Report Abuse
The NTG3B was engineered for broadcast-quality sound, enhanced immunity to RF (radio frequency) interference, and low handling noise. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones. The combination of the NTG3B's 10" long body and supercardioid polar pattern yields focused on-axis directionality with maximum rejection behind the mic. Its low self-noise of 13 dBA and highly sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones.
The NTG3B includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG3B in the Rode SMR-4 shockmount (available separately) to impede the transfer of vibrations between your boompole and the mic.
| Weight | 0.93 kg |
|---|---|
| Dimensions | 33.274 × 17.018 × 8 cm |
| Form Factor | Stand/Boom-Mount |
| Sound Field | Mono |
| Operating Principle | Line Gradient |
| Capsule | Condenser |
| Diaphragm | 0.5" / 12.70 mm |
| Polar Pattern | Supercardioid |
| Orientation | End Address |
| Circuitry | Solid-State |
| Pad | None |
| High-Pass Filter | None |
| Tone Adjustment | None |
| Indicators | None |
| On-Board Controls | None |
| Windscreen | Foam (Included) |
| Frequency Range | 40 Hz to 20 kHz |
| Maximum SPL | 130 dB SPL (1 kHz, 1% THD, 1-Kilohm Load) |
| Off-Axis Rejection | 8 dB at 60° 18 dB at 120° 17 dB at 180° |
| Impedance | 25 Ohms |
| Sensitivity | -30 dBV/Pa at 1 kHz |
| Output Level | 8.2 mV (Max) |
| Dynamic Range | 117 dB |
| Signal-to-Noise Ratio | 81 dB A-Weighted |
| Equivalent Noise Level | 13 dB A-Weighted |
| Output Connectors | 1 x XLR 3-Pin |
| Operating Voltage | 48 V ± 4 V |
| Operating Current Consumption | 5 mA |
| Color | Black |
| Mounting | 3/8"-16 Female, 5/8"-27 Female, Mic Clip (with Included Hardware) |
| Construction Material | Brass |
| Dimensions | ø: 0.75 x L: 10.04" / ø: 19 x L: 255 mm |
| Weight | 5.75 oz / 163 g (Microphone) |
| Package Weight | 2.06 lb |
| Box Dimensions (LxWxH) | 13.1 x 6.7 x 3.15" |
The Manfrotto 143BKT Camera Platform is a replacement camera platform for the Magic Arm. It has a standard 1/4-20 inch thread mount for a small camera.
The Manfrotto MT055XPRO3-3W Aluminum Tripod with 3-Way Pan/Tilt Head is a 3-section support with a 3-way pan/tilt head. It has a load capacity of 8 kg and extends from 9 cm to 183 cm. Its legs are secured by the Quick Power Locks. These updated flip locks increase the tripod’s rigidity by 50%.
A redesigned center column has a “one finger” operation, and includes an Easy Link attachment for attaching accessories such as an LED light or a reflector. The center column can be positioned horizontally, allowing for low-angle and macro photography. The upper disc where a tripod head is mounted has been redesigned as well, and now has a bull’s eye bubble level that rotates 360° so you can locate it where you can see it. This allows you to level your camera on both the horizontal and vertical planes.
The NTG3B was engineered for broadcast-quality sound, enhanced immunity to RF (radio frequency) interference, and low handling noise. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones. The combination of the NTG3B's 10" long body and supercardioid polar pattern yields focused on-axis directionality with maximum rejection behind the mic. Its low self-noise of 13 dBA and highly sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones.
The NTG3B includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG3B in the Rode SMR-4 shockmount (available separately) to impede the transfer of vibrations between your boompole and the mic.
Large-Diaphragm Condenser
Class-A Tube Circuitry
Mylar Dual-Diaphragm Capsule
Jensen Transformer
Rode NTK Valve 1.0″ Condenser Microphone
The Rode NTK Valve 1.0″ Condenser Microphone is a large-diaphragm condenser microphone which employs Class-A valve circuitry resulting in a warm sonic character. Sporting a cardioid polar pattern, the NTK is designed for vocal and general instrument recording, while providing the sonic character found in higher-priced tube microphones. The capsule features a mylar dual diaphragm sputtered in gold to provide transparent signal reproduction and wide frequency response.
The hand-selected and graded 6922 twin-triode valve comprises the core of the NTK’s circuitry, providing an analog “warmth” and presence that meets the standards of the most demanding engineers. The microphone features a custom-built, Mu-metal transformer developed by Jensen Transformers. The end result is quiet, noise-free output at high-gain levels. The NTK features a separate power supply, providing +48V phantom power.
In the Box
Rode NTK Valve 1.0″ Condenser Microphone
RC-2 Hard Plastic Case
M-2 Stand Mount
NTR-C 30′ (10 m) Multicore Cable
NTK-P Power Supply
PL100 Power Cable
3/8 – 5/8″ Thread Adapter
The RODE SC6-L is an interface designed to record two-person interviews directly to your iOS device. The interface accepts the inputs of the RODE smartLav+ microphone, multiple types of RODE VideoMics (in conjunction with TRRS adapters), and third-party microphones with the appropriate TRRS connection points.
At one end of the SC6-L, you’ll find two 3.5mm TRRS jacks. These are for your microphones. Between the two TRRS jacks is a 3.5mm headphone output for monitoring the incoming signal. At the other end of the interface you’ll see the lightning connector, which routes digital signal into your iOS device. The SC6-L facilitates audio recording at resolutions of 24-bit and sample rates of up to 48 kHz, making it a broadcast-quality unit.
The SC6-L works with the RODE Reporter App. This app allows you to change preamp gain and switch between record modes. You can also turn direct monitoring on or off from the app. Other apps work with the SC6-L such as the onboard Camera app, GarageBand, Voice Memos, and others. The SC6-L is compatible with devices sporting iOS 11 and later.
There are no reviews yet.