fbpx
-8%

Rode NTG2 Shotgun Microphone

Availability:

Out of stock


  • For Indie Films, TV & Documentaries
  • AA Battery or Phantom Powered
  • Selectable 80 Hz Low-Cut Filter
  • Low Handling Noise

EGP5,499.00 EGP5,999.00

Out of stock

Report Abuse
Capture 5

Quality Sound Capture

The combination of the NTG2's 11" long body and supercardioid polar pattern yields focused front-facing directionality and enhanced attenuation of sound entering from the sides. Its low self-noise of 18 dBA and sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.

apivc2heq 01223.1562124004

Battery or Phantom Powered

Thanks to its 3-pin XLR output and operability with 48V phantom power or a single AA battery, the NTG2 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on cameras and camcorders.

NTG3 SM4 Boompole

Ideal for Boompole Mounting

The NTG2 includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG2 in the Rode SM4-R shockmount or Rode PG2-R pistol grip (both available separately) to impede the transfer of vibrations in boompole or handheld applications.

SKU: NTG2 Category: Tags: , , , ,

Rode NTG2 Specs

Microphone

Form FactorStand/Boom-Mount
Sound FieldMono
Operating PrincipleLine Gradient
CapsuleCondenser
Diaphragm0.5" / 12.70 mm
Polar PatternSupercardioid
OrientationEnd Address
CircuitrySolid-State (JFET)
PadNone
High-Pass Filter80 Hz, 12 dB/Octave
Tone AdjustmentNone
IndicatorsNone
On-Board ControlsHigh-Pass Filter
WindscreenFoam (Included)

Performance

Frequency Range20 Hz to 20 kHz
Maximum SPL131 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
Off-Axis Rejection14 dB at 60° 16 dB at 120° 12 dB at 180°
Impedance250 Ohms (Phantom Power) 350 Ohms (Battery Power)
Sensitivity-36 dBV/Pa at 1 kHz
Output Level6.9 mV (Max)
Dynamic Range113 dB
Signal-to-Noise Ratio76 dB A-Weighted (1 kHz)
Equivalent Noise Level18 dB A-Weighted

Connectivity

Output Connectors1 x XLR 3-Pin

Power

Operating Voltage48 V (Phantom Power) 1.5 V (Battery Power)
Operating Current Consumption2 mA (Phantom Power) 0.18 mA (Battery Power)
Battery Type1 x AA

Physical

ColorBlack
Mounting3/8"-16 Female, 5/8"-27 Female, Mic Clip (with Included Hardware)
Construction MaterialAluminum
Dimensionsø: 0.87 x L: 11.02" / ø: 22 x L: 280 mm
Weight5.68 oz / 161 g (Microphone)

Packaging Info

Package Weight1.145 lb
Box Dimensions (LxWxH)13.15 x 6.05 x 2.15"

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Rode NTG2 Shotgun Microphone”

There are no reviews yet.

Vendor Information

  • Store Name: BSS Egypt
  • Vendor: BSS Egypt
  • Address: Al Kess Sergious
    Shams Eldeen Al Zahabi
    Heliopolis
    Cairo
  • No ratings found yet!
Capture 5

Quality Sound Capture

The combination of the NTG2's 11" long body and supercardioid polar pattern yields focused front-facing directionality and enhanced attenuation of sound entering from the sides. Its low self-noise of 18 dBA and sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.

apivc2heq 01223.1562124004

Battery or Phantom Powered

Thanks to its 3-pin XLR output and operability with 48V phantom power or a single AA battery, the NTG2 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on cameras and camcorders.

NTG3 SM4 Boompole

Ideal for Boompole Mounting

The NTG2 includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG2 in the Rode SM4-R shockmount or Rode PG2-R pistol grip (both available separately) to impede the transfer of vibrations in boompole or handheld applications.

Product Enquiry

SHOPPING CART

close