he Manfrotto 143N Magic Arm without Camera Bracket is designed to hold a light fixture in place, in a variety of situations. It is an elbow arm, with sure locking lever control at the pivot. It will accept any light fixture up to 3 kg that has a baby (5/8″) receptor.
Manfrotto MVMXPROA4US Aluminum XPRO Video Monopod
Available on backorder
- Load Capacity: 8 kg
- Max Height: 192 cm
- Closed Length: 68 cm
- Sections: 4
Manfrotto MVMXPROA4US Monopod
The MVMXPROA4US XPRO Video Monopod from Manfrotto is a versatile aluminum support equipped with Manfrotto’s FLUIDTECH base—a unique foot which allows for fluid pans and tilts normally unachievable on a standard photo monopod.
A handy tool for nearly any videographer or filmmaker, it can often travel places tripods cannot, providing additional stability and supporting heavy equipment when required. The MVMXPROA4US features a 4-section design which, when paired with its aluminum construction, results in an easy-to-transport design weighing just 2.6 lb. With a maximum height of 75.6″ and a minimum height of just 26.8″, the MVMXPROA4US can be adjusted to suit users of varying heights and for various different tasks.
While the design of a monopod is relatively simple it utilizes some innovative features which make using the MVMXPROA4US fast and easy. The primary feature of the line is the inclusion of Manfrotto’s patented Power-Lock flip locks which snap open and closed to ensure fast operation and a tight, unyielding lock. The D-shaped leg sections have been designed not only to compliment the Power-Locks but also to prevent unwanted twisting between leg sections and increase the stability of the monopod.
The integrated FLUIDTECH base utilizes a “3D” fluid cartridge which facilitates smooth pans and tilts from a single connection point. The cartridge may be locked vertically to isolate movement to only the 360° panning axis, allowing for smooth, level, uninterrupted rotation. While engaging the vertical lock may allow the monopod to stand, it does not support free-standing function and should not be left unattended when not in use.
Additionally, the Monopod+ line also features Manfrotto’s standard rubber leg warmer for an improved grip and an adjustable hand strap for extra security. A 1/4″-20 and 3/8″-16 mounting thread is placed at the top of the monopod in the center of the baseplate, allowing users to either, direct mount a camera or lens, or use an articulating head if required.
Available on backorderReport Abuse
|Dimensions||75 × 11.7 × 10.7 cm|
Manfrotto XPRO Specs
|Head Type||Fluid Head|
|Camera Mounting Screw||1/4″-20 Male, 3/8″-16 Male|
|Leg Lock Type||Flip Lock|
|Load Capacity||17.6 lb / 8 kg|
|Maximum Working Height||75.6″ / 192 cm|
|Folded Length||26.8″ / 68 cm|
|Weight||2.6 lb / 1.2 kg|
|Package Weight||3.45 lb|
|Box Dimensions (LxWxH)||29.4 x 4.6 x 4.2″|
Based on 0 reviews
- Store Name: BSS Egypt
- Vendor: BSS Egypt
Al Kess Sergious
Shams Eldeen Al Zahabi
- No ratings found yet!
Light Stands, Lighting
Manfrotto 143N Magic Arm without Camera BracketThe Magic Arm is modular — Stand it on the floor or a table with an optional Backlite base (3095).The Magic Arm is modular — Lock it into an optional Super (2915), or Maffer Clamp, on a pipe or shelf from 1.5- 5 cm in diameter or thickness.The Magic Arm is modular — Use it to mount a camera with the optional camera bracket (143BKT), or order #2930 which includes the mount.SKU: 143N
Manfrotto 502A Video Head and 546GB Tripod
- 502A Pro Video Head with 755 mm Half Ball
- 546GB Tripod with Ground Spreader
- Red & Black Tripod Carry Bag
- 7 kg Payload, 4 kg Counterbalance
Manfrotto 502A Pro Video Head with 75mm Half Ball
This Manfrotto Bundle includes the 502A Pro Video Head, the 546GB Tripod with a Ground Spreader, and a Tripod Carry Bag. The 502A features a 75mm half ball and 7 kg payload, and the 546GB offers a max height of 39 cm.
The Manfrotto 502A Pro Video Head with 75mm Half Ball is an affordable yet remarkably fully featured professional head that represents an advance over the popular 501HDV, with sturdier construction and a half ball for precise leveling on a corresponding tripod. The 502A comes in two versions—the “A” ball-base version such as this one, and the “AH” flat-base version which is separately available.
Featuring Manfrotto’s patented bridging technology (inherited from the 509 and 504 heads), the 502A is designed for executing cinematic moves with compact camcorders and DSLR video cameras. The weight limit is 7 kg and counterbalance supports up to 4 kg. The balance plate’s 8.5 cm range allows you to correct for uneven payloads that might be due to matte boxes or exotic DSLR rig configurations.
The bridging technology ensures that the pan friction control is intuitive and easy to set, but also protected against knocks. There are independent locks for pan and tilt, and drag for both is selectable in a continuous range from zero to the max level. This allows you to operate the head in a confident, smooth manner using the included pan bar.For video tripods with 75mm half balls75mm half ball connects to the corresponding bowl in a tripodPan drag and tilt drag are continuously adjustable from 0 (no drag) to the maximum levelSliding quick release plate secured by secondary safety system
In the Box
- Red & Black Tripod Carrying Bag
- Limited 6-Month Warranty, Extendable to 5 Years with Product Registration
Tripods, Supports & Rigs, Tripods & Support
Manfrotto MT055XPRO3 Aluminum Tripod with MHXPRO-3W 3-Way Pan/Tilt Head KitTripods, Supports & Rigs, Tripods & Support
Manfrotto MT055XPRO3 Aluminum Tripod with MHXPRO-3W 3-Way Pan/Tilt Head Kit
- MT055XPRO3 Aluminum Tripod
- MHXPRO-3W Pan/Tilt Head with QR Plate
- Load Capacity: 8 kg
- Max Height: 183 cm
MT055XPRO3 Aluminum Tripod with a MHXPRO-3W 3-Way Pan/Tilt Head. Holding up to 8 kg, and with a maximum height of 183 cm, the tripod features a Quick Power Lock System that allows you to completely extend the legs with just one hand. Once set up you can use the MT055XPRO3’s rapid center column in standard vertical mode or swing it into horizontal position like a boom with Manfrotto’s 90° column feature. Enlarged tabs on the individual leg angle selectors allow you to get down low for macro work with the column in horizontal mode. And once you’re down there you can attach any of Manfrotto’s flexible or articulated arms to hold lights or reflectors via the Easy Link plug built into the tripod’s spider.
The MHXPRO-3W is a compact 3-way pan/tilt head with retractable handles that can be extended as needed. Two knobs control the friction for the front-to-back and side-to-side tilt, allowing you to fine tune the movements based on the weight of your gear. A 200PL quick-release plate is included with the head.
Manfrotto MT055XPRO3 Aluminum Tripod
The Manfrotto MT055XPRO3 Aluminum Tripod is a three-section support that replaces the 055XPROB tripod. It has a load capacity of 9 kg and extends from 9 cm to 170 cm. Its legs are secured by the Quick Power Locks. These updated flip locks increase the tripod’s rigidity by 50%, and its load capacity by 2 kg over its predecessor.
A redesigned center column has a “one finger” operation, and includes an Easy Link attachment for attaching accessories such as an LED light or a reflector. The center column can be positioned horizontally, allowing for low-angle and macro photography. The upper disc where a tripod head is mounted has been redesigned as well, and now has a bull’s eye bubble level that rotates 360° so you can locate it where you can see it. This allows you to level your camera on both the horizontal and vertical planes.Manfrotto XPRO 3-Way, Pan-and-Tilt Head with 200PL-14 Quick Release Plate
This XPRO 3-Way, Pan-and-Tilt Head from Manfrotto has a load capacity of 8 kg and can be attached to tripods or other support systems that feature a 3/8″-16 mount. It includes an integrated RC2 quick release cam lock and a 200PL-14 Quick Release Plate. RC2 compatible quick release plates such as the 200PL-14 can be removed from the head by pulling the cam lock’s spring-loaded lever, which also allows the plate to be quickly reattached. The cam lock also features a safety catch to prevent the 200PL-14, or another compatible quick release plate from accidentally disconnecting.
Cameras, sport optics, or camcorders that are compatible with a 1/4″-20 mount can be connected to the quick release plate before securing it to the pan-and-tilt head. The head can be rotated 360°, tilted 90° forwards or 30° backwards, as well as 90° sideways for portrait orientation. Each of these three movements function independently of each other, have dedicated control handles, and can be locked into place. In addition to integrating the ability to individually lock the movements by twisting each corresponding handle’s rubberized grip, the telescoping control handles for both tilt functions can also be retracted while the head is not in use for more convenient storage or transport.
To promote fast and repeatable device positioning, this XPRO 3-Way, Pan-and-Tilt Head also includes a dedicated angle scale for rotational movements that is designed for easy visibility, as well as dedicated control knobs set under the telescoping control handles that can each be rotated to apply tension control to either the backwards and forwards, or sideways tilt movements at any time.
XPRO 3-Way, Pan-and-Tilt Head
- 8 kg load capacity
- Compatible with tripods or support systems that feature a 3/8″-16 mount
- Can be rotated 360°, tilted 90° forwards or 30° backwards, as well as 90° sideways for portrait orientation
- Rotation, backwards and forwards tilt, as well as portrait orientation tilt each function independently of each other, have dedicated control handles, and can be locked into place
- Telescoping control handles for both tilt functions can be retracted for more convenient storage or transport
- Dedicated angle scale for rotational movements that is designed for easy visibility helps promote fast and repeatable device positioning
- Integrated, RC2 quick release cam lock
- Two bubble levels for landscape orientations and one bubble level for portrait orientations
- Durable, aluminum-alloy construction
200PL-14 Quick Release Plate
- Compatible with Manfrotto RC2 quick release cam lock
- Measures 4.5 x 5.5 x 1 cm and has a rubberized, non-slip surface
- 1/4″-20 mount
- Durable, aluminum-alloy construction
In the BoxSKU: MAMT055XP3K6
– BSS warranty policy ensures that your product is protected against any defects in material, design and/or workmanship after purchase of the product. Warranty repairs will be carried out at BSS authorised service centres.
– In case of misuse or broken items, No warranty is applicable.
– In the case of a refund within 14 days, the customer must return all the sealed box and accessories of the product. Otherwise, the amount of any missing item will be deducted from the amount of the product.
– The warranty is not applicable to cases other than defects in material, design and/or workmanship. Warranty obligations are limited to repairing of defective product or refunding the amount of the purchased product.
You may also like…
Manfrotto MVMXPRO500US XPRO Aluminum Video Monopod
- Load Capacity: 5 kg
- Max Height: 203 cm
- Closed Length: 78 cm
- Sections: 4
Manfrotto MVMXPRO500US Monopod
The MVMXPRO500US XPRO Monopod from Manfrotto is a 4-section aluminum video support equipped with Manfrotto’s FLUIDTECH base and a 500-series fluid tilt head.
A versatile kit for nearly any videographer or filmmaker, the MVMXPRO500US can often travel places tripods cannot, providing additional stability and supporting heavy equipment when required. The 4-section design, paired with an aluminum construction, results in an easy-to-transport setup weighing just 4.6 lb. With a maximum height of 79.9″ and a minimum height of just 30.7″, the MVMXPRO500US can be adjusted to suit users of varying heights and for various different tasks.
While the design of a monopod is relatively simple, the Manfrotto Monopod+ line utilizes some innovative features which make using the MVMXPRO500US fast and easy. The primary feature of the line is the inclusion of Manfrotto’s patented Power-Lock flip locks which snap open and closed to ensure fast operation and a tight, unyielding lock. The D-shaped leg sections have been designed not only to compliment the Power-Locks but also to prevent unwanted twisting between leg sections and increase the stability of the monopod. The integrated FLUIDTECH base utilizes a “3D” fluid cartridge which facilitates smooth pans and tilts from a single connection point. The cartridge may be locked vertically to isolate movement to only the 360° panning axis, allowing for smooth, level, uninterrupted rotation. While engaging the vertical lock may allow the monopod to stand, it does not support free-standing function and should not be left unattended when not in use.
The MVMXPRO500US also includes a modified 500 series fluid head which allows the user to tilt their camera forward and backward on a counter-balanced mechanism. The head may be used while moving freely or locked in place via a side-mounted knob. Control of the head is facilitated by a single, long control arm which may be adjusted to the height of the user. A 500-series quick release plate is also included, allowing for quick vertical mounting and dismounting of your camera or camcorder.
Additionally, the Monopod+ line also features Manfrotto’s standard rubber leg warmer for an improved grip and an adjustable hand strap for extra security. A 1/4″-20 and 3/8″-16 mounting thread is provided under the 500 series head should the user choose to use the monopod without a head for direct camera mounting.SKU: MVMXPRO500US