No products in the cart.
Monitors, Monitors Mounts, Uncategorized
Manfrotto 492 LCD Micro Ball Head with Cold Shoe
- Load Capacity: 4 kg
- Height: 7.7 cm
- Weight: 0.20 kg
- 1/4″-20 Camera Mounting Thread
Manfrotto 492 LCD Micro Ball Head with Cold Shoe
The 492LCD Micro Ball Head with Cold Shoe from Manfrotto can support up to 4 kg, and the head has a single lever lock, which controls the ball and pan movements at the same time. The 0.20 kg head has a cut notch on the side that allows you to position the camera at a 90° angle. Attach the camera to the head via its 1/4″-20 mounting thread.
In the Box
- Manfrotto 492 LCD Micro Ball Head with Cold Shoe
- Limited 6-Month Warranty (Extended to 9 Years and 6 Months with Online Registration)
EGP1,200.00
Report Abuse| Weight | 0.23 kg |
|---|---|
| Dimensions | 11.2 × 8.9 × 6.6 cm |
Manfrotto MH492LCD-BHUS Specs
| Bottom Mount | 1 x Accessory Foot |
| Top Mount | 1 x 1/4″-20 Male |
| Load Capacity | 8.8 lb / 3.99 kg |
| Material | Aluminum |
| Dimensions | 0 x 0 x 3.5″ / 0 x 0 x 8.89 cm |
| Weight | 0.4 lb / 167.8 g |
Based on 0 reviews
Be the first to review “Manfrotto 492 LCD Micro Ball Head with Cold Shoe”
Vendor Information
- Store Name: BSS Egypt
- Vendor: BSS Egypt
- Address: Al Kess Sergious
Shams Eldeen Al Zahabi
Heliopolis
Cairo - No ratings found yet!
- Monopods
Manfrotto MVMXPROA4US Aluminum XPRO Video Monopod
- Load Capacity: 8 kg
- Max Height: 192 cm
- Closed Length: 68 cm
- Sections: 4
Manfrotto MVMXPROA4US Monopod
The MVMXPROA4US XPRO Video Monopod from Manfrotto is a versatile aluminum support equipped with Manfrotto’s FLUIDTECH base—a unique foot which allows for fluid pans and tilts normally unachievable on a standard photo monopod.
A handy tool for nearly any videographer or filmmaker, it can often travel places tripods cannot, providing additional stability and supporting heavy equipment when required. The MVMXPROA4US features a 4-section design which, when paired with its aluminum construction, results in an easy-to-transport design weighing just 2.6 lb. With a maximum height of 75.6″ and a minimum height of just 26.8″, the MVMXPROA4US can be adjusted to suit users of varying heights and for various different tasks.
While the design of a monopod is relatively simple it utilizes some innovative features which make using the MVMXPROA4US fast and easy. The primary feature of the line is the inclusion of Manfrotto’s patented Power-Lock flip locks which snap open and closed to ensure fast operation and a tight, unyielding lock. The D-shaped leg sections have been designed not only to compliment the Power-Locks but also to prevent unwanted twisting between leg sections and increase the stability of the monopod.
The integrated FLUIDTECH base utilizes a “3D” fluid cartridge which facilitates smooth pans and tilts from a single connection point. The cartridge may be locked vertically to isolate movement to only the 360° panning axis, allowing for smooth, level, uninterrupted rotation. While engaging the vertical lock may allow the monopod to stand, it does not support free-standing function and should not be left unattended when not in use.
Additionally, the Monopod+ line also features Manfrotto’s standard rubber leg warmer for an improved grip and an adjustable hand strap for extra security. A 1/4″-20 and 3/8″-16 mounting thread is placed at the top of the monopod in the center of the baseplate, allowing users to either, direct mount a camera or lens, or use an articulating head if required.
SKU: MVMXPROA4US
– BSS warranty policy ensures that your product is protected against any defects in material, design and/or workmanship after purchase of the product. Warranty repairs will be carried out at BSS authorised service centres.
– In case of misuse or broken items, No warranty is applicable.
– In the case of a refund within 14 days, the customer must return all the sealed box and accessories of the product. Otherwise, the amount of any missing item will be deducted from the amount of the product.
– The warranty is not applicable to cases other than defects in material, design and/or workmanship. Warranty obligations are limited to repairing of defective product or refunding the amount of the purchased product.
Product Enquiry
Related products
- Tripods
Manfrotto MK290XTA3-3WUS 290 Xtra Aluminum Tripod with 804 3-Way Pan/Tilt Head
- Load Capacity: 4 kg
- Max Height: 171.5 cm
- Min Height: 42 cm
- Folded Length: 70.5 cm
Manfrotto MK290XTA3-3WUS Tripod
The Manfrotto 290 Xtra Aluminum Tripod with 804 3-Way Pan/Tilt Head extends from 42 cm to a maximum height of 171.5 cm. It weighs 2.5 kg and can hold up to 4 kg of gear. The tripod’s 3-section legs have flip locks to individually change the height of each leg. The locks are tension-adjustable to help maintain a tight lock over the tripod’s lifespan. Four leg angles allow you to position the tripod in a variety of ways. A rubber grip on one of the legs aids in carrying the tripod, and rubber feet keep it stable on slippery surfaces.
The included 804 3-way pan/tilt head features retractable handles, which decreases the overall size when not in use. A built-in spring assists with the tilting motion of the head by compensating for heavier lenses and cameras with off-center loads. A 200LT-PL quick-release plate is included for quickly attaching and removing your camera from the head. Also included with the tripod is a shoulder bag for added comfort and protection during transport.
SKU: MK290XTA3-3WUS - Tripods
Manfrotto MK190XPRO3-3W Aluminum Tripod with 3-Way Pan/Tilt Head
- Load Capacity: 6 kg
- Max Height: 173 cm
- Min Height: 9 cm
- Folded Length: 72 cm
Manfrotto MK190XPRO3-3W Tripod
The Manfrotto MK190XPRO3-3W Aluminum Tripod with 3-Way Pan/Tilt Head combines the MT190XPRO3 tripod legs with the MHXPRO-3W 3-way pan/tilt head. The tripod has a load capacity of 6 kg, extends up to 173 cm, and folds down to 72 cm for transport.
The Quick Power Lock System allows you to completely extend the tripod legs with one hand. Once set up, you can use the tripod’s rapid center column in standard vertical mode or swing it into horizontal position like a boom with Manfrotto’s 90° column feature to get your camera down to only 9 cm above the ground. You can attach an extending arm or bracket to hold lights or reflectors via the Easy Link plug built into the tripod’s spider.
SKU: MK190XPRO3-3W - Monopods
Manfrotto MVMXPRO500US XPRO Aluminum Video Monopod
- Load Capacity: 5 kg
- Max Height: 203 cm
- Closed Length: 78 cm
- Sections: 4
Manfrotto MVMXPRO500US Monopod
The MVMXPRO500US XPRO Monopod from Manfrotto is a 4-section aluminum video support equipped with Manfrotto’s FLUIDTECH base and a 500-series fluid tilt head.
A versatile kit for nearly any videographer or filmmaker, the MVMXPRO500US can often travel places tripods cannot, providing additional stability and supporting heavy equipment when required. The 4-section design, paired with an aluminum construction, results in an easy-to-transport setup weighing just 4.6 lb. With a maximum height of 79.9″ and a minimum height of just 30.7″, the MVMXPRO500US can be adjusted to suit users of varying heights and for various different tasks.
While the design of a monopod is relatively simple, the Manfrotto Monopod+ line utilizes some innovative features which make using the MVMXPRO500US fast and easy. The primary feature of the line is the inclusion of Manfrotto’s patented Power-Lock flip locks which snap open and closed to ensure fast operation and a tight, unyielding lock. The D-shaped leg sections have been designed not only to compliment the Power-Locks but also to prevent unwanted twisting between leg sections and increase the stability of the monopod. The integrated FLUIDTECH base utilizes a “3D” fluid cartridge which facilitates smooth pans and tilts from a single connection point. The cartridge may be locked vertically to isolate movement to only the 360° panning axis, allowing for smooth, level, uninterrupted rotation. While engaging the vertical lock may allow the monopod to stand, it does not support free-standing function and should not be left unattended when not in use.
The MVMXPRO500US also includes a modified 500 series fluid head which allows the user to tilt their camera forward and backward on a counter-balanced mechanism. The head may be used while moving freely or locked in place via a side-mounted knob. Control of the head is facilitated by a single, long control arm which may be adjusted to the height of the user. A 500-series quick release plate is also included, allowing for quick vertical mounting and dismounting of your camera or camcorder.
Additionally, the Monopod+ line also features Manfrotto’s standard rubber leg warmer for an improved grip and an adjustable hand strap for extra security. A 1/4″-20 and 3/8″-16 mounting thread is provided under the 500 series head should the user choose to use the monopod without a head for direct camera mounting.
SKU: MVMXPRO500US
There are no reviews yet.