- Camera Batteries
FUJIFILM VG-XT3 Vertical Battery Grip
- For X-T3 Mirrorless Camera
- Holds 2x NP-W126S Batteries
- Extended Grip for Vertical Composition
- Secondary Shutter Release
FujiFilm Vertical Battery Grip
Dedicated to the FUJIFILM X-T3 mirrorless camera, the VG-XT3 Vertical Battery Grip benefits shooting in the vertical orientation and also accepts two additional NP-W126S rechargeable lithium-ion batteries for extended shooting times. The included AC-9VS AC adapter can be used to charge two batteries in the grip, too, with a charge time of approximately two hours.
In terms of its physical design, the extended shape incorporates a secondary shutter release button as well as a focus lever, AE-L button, AF-L button, front and rear command dials, Q button, and Fn button to mimic the camera’s own layout for intuitive handling. Additionally, the grip is also water, dust, and freeze resistant to the same degree as the camera body to maintain its ability to function in harsh conditions.
In the Box
- FUJIFILM VG-XT3 Vertical Battery Grip
- AC-9VS AC Adapter
- Limited 1-Year Warranty
SKU: 16588781 - Camera Batteries
FUJIFILM NP-W126S Li-Ion Battery Pack
- For Select X-Series and FinePix Cameras
- Improved Heat Management
FujiFilm NP-W126S Battery
For using the maximum power of your mirrorless camera, the FUJIFILM NP-W126S Li-Ion Battery Pack has been designed to better manage heat and ensure lightning fast camera performance. This battery is also compatible with older cameras that use the NP-W126 battery pack, but users will not see any performance advantages in those bodies.
Compatible Cameras:-
- X-H1
- X-Pro2
- X-Pro1
- X-T3
- X-T2
- X-T1
- X-T30
- X-T20
- X-T10
- X-T100
- X-E3
- X-E2S
- X-E2
- X-E1
- X-M1
- X-A5
- X-A3
- X-A2
- X-A1
- X-A10
- X100F
- FinePix HS50EXR
- FinePix HS33EXR
- FinePix HS30EXR
SKU: 16528470
FUJIFILM VG-XT3 Vertical Battery Grip
Out of stock
- For X-T3 Mirrorless Camera
- Holds 2x NP-W126S Batteries
- Extended Grip for Vertical Composition
- Secondary Shutter Release
FujiFilm Vertical Battery Grip
Dedicated to the FUJIFILM X-T3 mirrorless camera, the VG-XT3 Vertical Battery Grip benefits shooting in the vertical orientation and also accepts two additional NP-W126S rechargeable lithium-ion batteries for extended shooting times. The included AC-9VS AC adapter can be used to charge two batteries in the grip, too, with a charge time of approximately two hours.
In terms of its physical design, the extended shape incorporates a secondary shutter release button as well as a focus lever, AE-L button, AF-L button, front and rear command dials, Q button, and Fn button to mimic the camera’s own layout for intuitive handling. Additionally, the grip is also water, dust, and freeze resistant to the same degree as the camera body to maintain its ability to function in harsh conditions.
In the Box
- FUJIFILM VG-XT3 Vertical Battery Grip
- AC-9VS AC Adapter
- Limited 1-Year Warranty
EGP5,992.00
Out of stock
Report AbuseWeight | 0.65 kg |
---|---|
Dimensions | 19 × 19 × 7 cm |
FUJIFILM VG-XT3 Specs
Battery Type | 2 x Battery Pack (NP-W126S) |
Tripod Mounting Thread | 1/4″-20 Female |
Packaging Info
Package Weight | 1.4 lb |
Box Dimensions (LxWxH) | 7.5 x 7.2 x 2.7″ |
Based on 0 reviews
Be the first to review “FUJIFILM VG-XT3 Vertical Battery Grip”
Vendor Information
- Store Name: Gleee
- Vendor: Gleee
- Address: 6 El Sayed Mohamed Eissa
Abdel Aziz Fahmy
Heliopolis
Cairo
11361 - No ratings found yet!
- Lighting
Nanlite Forza 60 Bowens Mount Adapter
- For Forza 60 LED Light Heads
- Adds Bowens S-Style Reflector Mount
- Integrated Umbrella Mount
- Adjustable Stand Adapter
Nanlite Forza 60 Bowens Mount Adapter
The Forza 60 Bowens Mount Adapter from Nanlite expands the light shaper compatibility of the Forza 60 LED light head to include most Bowens S-mount-style softboxes, reflectors, and beauty dishes, plus shaft-mounted accessories like umbrellas. The position of the tilting stand adapter moves the center of gravity forward, providing better balance when using large modifiers, and then tightens securely in position with a large, easy-to-grip ratchet handle.
- Bowens S-mount with reflector lock
- Tilting stand mount
- Ratchet handle
- Umbrella mount with locking knob
In the Box
- Nanlite Forza 60 Bowens Mount Adapter
SKU: AS-BA-FZ60 - Pro Audio, Uncategorized, Wired Microphone Accessories
Sennheiser ME 2-II Omnidirectional Lavalier Microphone (Black)
Pro Audio, Uncategorized, Wired Microphone AccessoriesSennheiser ME 2-II Omnidirectional Lavalier Microphone (Black)
- For Sennheiser Transmitters
- Locking 3.5mm Connector
- Omnidirectional Pickup Pattern
- Improved Design over Original ME 2
Sennheiser ME 2-II Specs
Available in black, the ME 2-II from Sennheiser is an omnidirectional lavalier microphone designed to capture speech and vocals. It takes concepts found in the original ME-2 and expands them, focusing the frequency response and offering full compatibility with digital RF-transmission systems. Whereas the ME-2 could introduce noise if the capsule and transmit antenna were over 7.9” away from each other, the ME 2-II is 100% compliant with digital RF systems, such as the SpeechLine Digital Wireless system.
Also, where the ME-2 gave you a frequency response of 30 Hz to 20 kHz, this iteration narrows the range from 50 Hz to 18 kHz. The focusing allows the capsule to hone in more on appropriate tonalities, minimizing the capture of frequencies piercingly high and unnecessarily low in the context of vocal recording.
Additionally, this model features a lighter-weight housing compared to the original, as well as an improved clip and an integrated windscreen. A cable length of 5.2′ provides enough slack for nearly any situation, at the end of which sits a locking 3.5mm Sennheiser-style connector for compatible systems, such as the AVX, XS Wireless 1, XS Wireless 2, and more.
In the Box
- Sennheiser ME 2-II Omnidirectional Lavalier Microphone (Black)
- Clip
- Limited 2-Year Warranty
SKU: ME2-II - Uncategorized
GoPro Protective Housing for HERO8 Black
- Rugged Housing for HERO8 Black
- Glass Lens, Waterproof Down to 196′
- Protects from Dirt and Debris
- Access to Camera’s Touchscreen
GoPro Protective Housing for HERO8 Black
Dive deeper with your HERO8 using this Protective Housing from GoPro. Though the HERO8 is waterproof, this protective housing offers additional protection against dust, mud, and debris and allows you to dive underwater up to 196′.
The housing features a flat glass lens to ensure a clear, clean shot while underwater or on land. If you need to adjust the camera settings while the housing is attached, it also allows access to the camera’s touchscreen. Since the housing is enclosed, it will mute your audio, so an optional skeleton back door is included to open up the microphone. However, the skeleton back door is only for use on land since it will not contribute to protection or waterproofing.
In the Box
- GoPro Protective Housing for HERO8 Black
- Skeleton Back Door
- Mounting Buckle
- Thumbscrew
SKU: AJDIV-001 - Lens Filters
NiSi 100 x 100mm Nano IRND 1.8 Filter (6-Stop)
- 64x Filter Factor, 6-Stop
- Darkens Entire Image
- Allows Reduced Shutter Speed
- Allows Wider Aperture
Nisi 100 x 100mm 6-Stop ND Filter
The NiSi 100 x 100mm Nano IRND 1.8 Filter is an ND filter with a 64x filter factor that provides a 6-stop exposure reduction. Its 1.8 density creates a darkening of the entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required. By slowing your exposure time or increasing your aperture, you are able to control depth of field and convey movement more easily. Neutral density filters are intended to not affect the coloration of the image and are ideal for pairing with other filters.
The design of this filter has been optimized for use with digital sensors and to promote nearly flat attenuation of visible and infrared light. Due to imaging sensors’ greater susceptibility to infrared light, compared to traditional film, color casts can occur when photographing darker subjects that require increased exposure times. To provide a high level of neutrality across the visible and infrared spectrums in order to eliminate color casts and ensure cleaner, truer blacks when using the NiSi 100 x 100mm Nano IRND 1.8 Filter, one layer of NiSi Optical Nano Coating is applied to each of this filter’s surfaces. The Nano coating associated with this filter also results in an improved beading effect when in contact with water or oil for greater cleaning efficiency.
This NiSi 100 x 100mm Nano IRND 1.8 Filter is constructed from optical glass for clarity as well as color fidelity, and measures 2mm thick.
In the Box
- NiSi 100 x 100mm Nano IRND 1.8 Filter (6-Stop)
- Filter Pouch
SKU: NIP-100-ND1.8
There are no reviews yet.