In the Box
- Loupedeck + Photo & Video Editing Console
- Limited 1-Year Hardware Warranty
Addressing the needs of multimedia image-makers, the silver FUJIFILM X-T4 is a versatile mirrorless camera that blends advanced stills and video capabilities along with enhanced workflow and assistive functionality. Utilizing a proven and well-regarded APS-C-format 26.1MP X-Trans CMOS 4 sensor, the X-T4 is capable of high-resolution recording along with support for DCI/UHD 4K video at 60 fps, Full HD recording up to 240 fps, sensitivity from ISO 160-12800, and continuous shooting up to 15 fps with the mechanical shutter. The BSI design of the sensor affords reduced noise and greater overall clarity and is paired with the X-Processor 4 to achieve fast performance and improved responsiveness. The sensor’s design also enables a hybrid autofocus system that combines 425 phase-detection points with a contrast-detection system for quick and accurate AF performance. Additionally, complementing all aspects of image production, the X-T4 also incorporates a 6.5 stop-effective sensor-shift image stabilization system to reduce the appearance of camera shake with almost any mounted lens.
Beyond the sensor and processor capabilities, FUJIFILM’s cameras are also beloved for their physical design, and the X-T4 has an updated design for improved handling and shooting efficiency. A large, bright 3.69m-dot electronic viewfinder can be set to a 100 fps refresh rate for notable smoothness when panning or tracking subjects. Conversely, the rear 3.0″ 1.62m-dot touchscreen LCD now features a vari-angle design to suit working from high, low, and front-facing angles; or it can be closed against the body if just working with the EVF. Dual SD UHS-II memory card slots offer file-saving flexibility and the X-T4 supports the updated, high capacity NP-W235 battery that provides approximately 600 shots per charge. Additionally, built-in Wi-Fi and Bluetooth enables wireless remote camera control and image sharing to a mobile device.
Dive deeper with your HERO8 using this Protective Housing from GoPro. Though the HERO8 is waterproof, this protective housing offers additional protection against dust, mud, and debris and allows you to dive underwater up to 196′.
The housing features a flat glass lens to ensure a clear, clean shot while underwater or on land. If you need to adjust the camera settings while the housing is attached, it also allows access to the camera’s touchscreen. Since the housing is enclosed, it will mute your audio, so an optional skeleton back door is included to open up the microphone. However, the skeleton back door is only for use on land since it will not contribute to protection or waterproofing.
The 492LCD Micro Ball Head with Cold Shoe from Manfrotto can support up to 4 kg, and the head has a single lever lock, which controls the ball and pan movements at the same time. The 0.20 kg head has a cut notch on the side that allows you to position the camera at a 90° angle. Attach the camera to the head via its 1/4″-20 mounting thread.
Keep your shoot going even if the weather takes a turn or light your underwater shot properly with the Nanlite Waterproof Bag for their Pavotube II 6C LED light. Made of durable clear TPU (thermoplastic polyurethane), the light fits into the bag and gets sealed in, providing waterproof protection to a depth of over 20m.
For those working in high-performance industries such as broadcasting, cinema, and photography, the 64GB Extreme PRO CFast 2.0 Memory Card from SanDisk combines the speed, capacity, and performance needed to record uninterrupted DCI 4K video, which has a resolution of 4096 x 2160 and a 17:9 aspect ratio. It features a SATA III 6 Gb/s bus, a maximum read speed of up to 525 MB/s (3500x), a maximum write speed of up to 430 MB/s (2867x), and a minimum write speed of 130 MB/s. Its minimum write speed is backed up by the Video Performance Guarantee 130 standard (VPG-130), meaning that its minimum write speed will never drop below 130 MB/s. This card has been tested to work in temperatures of -4 to 158°F, and in the case of card errors or accidental deletions, this card comes with a RescuePRO Deluxe data recovery software download offer.
Available in black, the ME 2-II from Sennheiser is an omnidirectional lavalier microphone designed to capture speech and vocals. It takes concepts found in the original ME-2 and expands them, focusing the frequency response and offering full compatibility with digital RF-transmission systems. Whereas the ME-2 could introduce noise if the capsule and transmit antenna were over 7.9” away from each other, the ME 2-II is 100% compliant with digital RF systems, such as the SpeechLine Digital Wireless system.
Also, where the ME-2 gave you a frequency response of 30 Hz to 20 kHz, this iteration narrows the range from 50 Hz to 18 kHz. The focusing allows the capsule to hone in more on appropriate tonalities, minimizing the capture of frequencies piercingly high and unnecessarily low in the context of vocal recording.
Additionally, this model features a lighter-weight housing compared to the original, as well as an improved clip and an integrated windscreen. A cable length of 5.2′ provides enough slack for nearly any situation, at the end of which sits a locking 3.5mm Sennheiser-style connector for compatible systems, such as the AVX, XS Wireless 1, XS Wireless 2, and more.
TELESIN USB 3 Slots Battery Charger for Hero 6,7 for Smart WiFi Remote, with 2 Batteries. Built-in Grade A Japanese Battery Core to ensure high performance and long battery life. Multiple protection: Protection Program protects the battery from over-charging and over-discharging