No products in the cart.
Batteries & Power
Showing all 12 results
- Power Adapter Cables
LanParte D-Tap Male to Female 1:4 Cable Splitter Hub
- D-Tap Male to 4-Port D-Tap Female Cable Splitter for Anton Bauer V-mount Battery
LanParte D-Tap Splitter
The D-Tap Male to Female 1:4 Cable Splitter Hub from LanParte allows you to power up to four D-Tap plug accessories. Provide power to your LED light, LCD monitor, EVF, and SDI adapter from a single Gold or V-Mount camera battery.
SKU: DTAP-1TO4 - Batteries & Power Accessories, Power Adapter Cables
LanParte D-Tap to 4-Pin XLR Power Adapter Cable
- D-Tap to 4-Pin XLR Connector
- 63.5cm Long
LanParte D-Tap to 4-Pin XLR connection
This Lamparte D-Tap to XLR Power Cable allows you to connect a brick battery to any device with a 4-pin XLR input. It runs 63.5 cm long.
SKU: DTAP-4PXLR - Power Adapter Cables
LanParte D-Tap to DC Barrel Power Cable for Blackmagic Camera (60cm)
- Power 2.5K or 4K Blackmagic Camera from D-Tap Sources
LanParte D-Tap to DC Barrel Cable
This D-Tap to DC Barrel Power Cable from Lanparte runs 24″ long and allows you to power your 2.5K or 4K Blackmagic Camera directly from a D-Tap-equipped power source. Power the camera from select batteries, battery plates, and other devices.
Note: Please pay attention to the +/- polarity of the D-Tap connector to avoid damaging your camera.SKU: DC-55-25 - Power Adapter Cables
LanParte D-Tap to LEMO Power Cable for Canon C300 Mark II
- For the Canon C300 Mark II
- D-Tap Connector
- 60cm 4-Pin LEMO Cable
LanParte D-Tap Canon C300 MK II Power Cable
Use this D-Tap to LEMO Power Cable from LanParte to power your Canon C300 Mark II through the D-Tap output of a battery or battery adapter plate. The D-Tap to LEMO Power Cable extends your camera operating time by enabling the use of longer-lasting pro batteries with D-Tap ports.
SKU: DT-LM-4-65 - Power Adapter Cables
LanParte VBP-02 V-Mount Battery Pinch
- Smart charging function
- V-mount lock
- 15mm Rod connectors
- Can be mounted onto the back of the rig as counterweight
LanParte V-mount Battery Plate
The VBP-02 V-Mount Battery Pinch from LanParte is a multifunction power adapter. You can mount a V-mount battery as your power source, or connect the unit to AC power via the included power adapter. The VBP-02 features multiple DC outputs (5, 7.4, 12, 15V, and a D-Tap), enabling you to power multiple devices simultaneously. The Battery Pinch also features two 15mm rod connectors, allowing you to mount it onto an existing rig. The DC barrel charger input allows you to charge the mounted battery. The VPB-02 works best in conjunction with the Shoulder Pad; these two items attached to your rig serve as a counterbalance weight.
In the Box
- LanParte VBP-02 V-Mount Battery Pinch
- LanParte Red-Tip Camera DC Power Spring Cable for Battery Pinch (3.5/1.35mm)
- 3 x LanParte Yellow-Tip Camera DC Power Spring Cable for Battery Pinch (5.5/2.1mm)
- LanParte DC Power Cable for Canon C300
- AC Adapter (19 VDC, 3.42 A)
- Limited 1-Year Warranty
SKU: VBP-02 - Chargers
SWIT 4-Ch Simultanoues Chager For The Swit S-8PE6 And Canon LP-E6
- 4-ch simultaneous charging
- 2A charging current per channel
- Snap-on exchangeable DV plates
- Mixed types of DV batteries charging
- U/F/D/B/C/I/V/E plates supported
- 4-LED charging indicators
SWIT 4-Ch Simultanoues Chager
The 4-channel DV Charger from SWIT is a universal charger capable of charging up to 4 DV batteries simultaneously, with 2A charging current per channel. Users can exchange different types of battery plate to charge different types of DV batteries together.
You can select the following snap-on quick exchangeable DV plates to mount on LC-D421, to charge different batteries:
- KA-C10U: SONY BP-U type
- KA-C10F : SONY NP-F type
- KA-C10D : Panasonic CGA, AG-VBR59
- KA-C10B : Panasonic VW-VBG6
- KA-C10C: Canon BP-945 type
- KA-C10I: SSL-JVC50 type
- KA-C10V : JVC BN-VF823 type
- KA-C10E : Canon LP-E6
SKU: LC-D421E - Camcorder Batteries
SWIT PB-S98S 14.4V 98Wh Dual D-Tap Heavy-Duty Digital Battery (V-Mount)
- Short, Compact Design
- Up to 100W/8A Continuous Output
- Powers ENG Cameras for Approx. 3 Hours
- Suitable for Drone & Mobile Applications
SWIT PB-S98S 14.4V Battery (V-mount)
The SWIT PB-S98S 14.4V 98Wh Dual D-Tap Heavy-Duty Digital Battery, featuring a V-mount, has a short, compact design and provides up to 100W/8A continuous output. While it’s suitable for most cameras and devices and it can power an ENG camera for approximately 3 hours, its small size also makes it ideal for drones and other mobile applications. In addition to this, the PB-S98S offers two D-Tap outputs for powering accessories and a USB port for charging mobile devices.
The battery has an intelligent LCD that displays remaining runtime in minutes when the battery is in use and as a percentage value when not in use or when charging. When remaining runtime is less than 15 minutes, the LCD will flash as a warning. It’ll also show a warning signal with a specific warning code if the battery detects over-discharging, over-charging, circuit issues, and the like. A long press of the power-check button will display the battery’s cycle times on the LCD. The PB-S98S also communicates runtime info to RED and Sony viewfinders.
In the Box
- SWIT PB-S98S 14.4V 98Wh Dual D-Tap Heavy-Duty Digital Battery (V-Mount)
SKU: PB-S98S - Chargers
SWIT S-3602F Dual Charger/Adapter for Sony NP-F970/770/960/950 Batteries
- Two-channel simultaneous charging
- Two 8.4V, 3.5A (total) DC adapting output sockets
- Compatible with SWIT S-8972/S-8970 and Sony L series batteries
- Includes the S-7500F dummy adapter to adapt to Sony HVR-V1E, HVR-Z1E, and Z7E and corresponding accessories
- Four-level LED charging indicators
SWIT S-3602F Dual Charger for Sony L-Series Batteries
The SWIT S-3602F Dual Charger/Adapter has two charging channels with 7-8.4 VDC, 2A output each for simultaneously charging two batteries. It is compatible with the SWIT S-8972/S-8970 and Sony L series batteries. Four-level LED charging indicators for each channel indicate the percentage of charge remaining.
The dual charger also has two 5.5/2.1mm DC pole sockets to provide 8.4V, 3.5A (total) DC adapting output. The S-7500F dummy adapter is included for adapting Sony HVR-V1E, HVR-Z1E, and Z7E cameras or equipment with the corresponding battery mounts. Both channels can simultaneously provide DC output to the connected cameras/accessories or one channel can be used to charge a battery by dropping it in, while the other can be used to adapt to a camera/accessory.
SKU: S-3602F - Chargers
SWIT S-3802S V-Mount Charger/Adapter for Sony and SWIT V-Mount Batteries
- 2 channels sequential charge
- 4-pin XLR adapter output
- Compatible with Li-Ion, Ni-MH and Ni-Cd batteries
- V-mount plate
SWIT S-3802S V-Mount Charger
The S-3802S V-Mount Battery Adapter from SWIT is a portable 2-channel sequential charger for use with Sony and SWIT V-mount batteries. This charger can automatically recognize the type of battery being charged (Li-ion, Ni-HM, and Ni-Cd). It can also be used as an AC adapter through its 4-pin XLR DC output. The 4-pin XLR power cable S-7102 is available separately.
SKU: S-3802S - Chargers
SWIT SC-302S 2-Channel Sequential Charger for V-Mount Batteries
Charging V-mount batteries
2-ch sequential charging
1.9A charging current per channel
LED charging indicators
Support AC to 4-pin XLR output
Light weight and portableSWIT SC-302S Dual Charger
The portable charger SC-302S can charge 2 V-mount batteries sequentially. It has LED charging indicators on the front panel, indicates the real time capacity of each channel by different colors. The charger has a 4-pin XLR female connector on the front panel. Connected with SWIT S-7102 XLR female to male cable, it can be used as AC-DC adapter of DC 14-20V, 1.9A output.SKU: SC-302S
